Transporting 280ft wing

danmand

Well-known member
Nov 28, 2003
46,971
5,606
113
 
very interesting


quite a challenge

think they could have pieced it then assembled on site as there is little stress on wing

in Canada it is illegal to heavy haul at night like these guys are doing on a open highway with traffic
 
Last edited:
It might in hindsight have been more clever to locate the plant beside a harbour instead of by a little village on Funen.
 
very interesting


quite a challenge

think they could have pieced it then assembled on site as there is little stress on wing

in Canada it is illegal to heavy haul as night

Nah, it is much too specialized to assemble on site. You could use a built up wing, but it would be less efficient and more expensive then the way they do it.
 
Nah, it is much too specialized to assemble on site. You could use a built up wing, but it would be less efficient and more expensive then the way they do it.

you forgot to consider the risk, the cost and time involved planning and executing transportation



i used to truck and the really long stuff goes down back roads

they widen turns where required and take down hydro lines

all very well planed but i have seen some get in real trouble


IE going over cliffs, hitting bridges, specialized one time equipment breaking down

then there is the weather to worry about IE getting stuck in mud, not getting move done by winter, wind storms , hail storms, tornadoes, hurricanes

most of that transportation cost and risk is gone assembling on site


but they are doing it in one piece so there is a reason

it just surprises me that a blade with such small work stress on it (they spin so slow) could not be easily bolted together on site

this move could be a clever marketing trick that could have been done in pieces but then they get no press coverage
 
you forgot to consider the risk, and cost, of transportation



i used to truck and the really long stuff goes down back roads

they widen turns where required and take down hydro lines

all very well planed but i have seen some get in real trouble


IE going over cliffs, hitting bridges, specialized one time equipment breaking down

then there is the weather to worry about IE getting stuck in mud, not getting move done by winter, wind storms , hail storms, tornadoes, hurricanes

The universe is not only stranger than we imagine, it is stranger than we are capable of imagining.

yes it is not easy, I am sure it is STILL more practical. wonder what they cannot get one of those massive Russian MI-26's to haul that sucked to the site....I suppose it would cost a fortune..but if they use Helos to cut lumber, you'd think it would be worthwhile for these mega projects.
 
yes it is not easy, I am sure it is STILL more practical. wonder what they cannot get one of those massive Russian MI-26's to haul that sucked to the site....I suppose it would cost a fortune..but if they use Helos to cut lumber, you'd think it would be worthwhile for these mega projects.

i would worry about the wind catching the aerodynamic wing and the wing taking off in flight
 
I see smaller versions of these going up Hwy 6 all the time. I think that are 60m long, and come in to Hamilton on ships before being scooted up the road. They have an escort vehicle as I recall, but otherwise it looks pretty straight forward.