question about gun laws

Manual action firearms like a bolt, lever or pump don't generally have a capacity limit. The UTS 15 or KelTec KSG are pump shotguns, so there is no actual legal limit. Most manual action firearms have limited capacity by design anyways. Popular, small calibre rimfire rounds are .22LR (or Long, Short, CB, etc.), .22 WMR, .17 HMR, .17 WSM. While there isn't really a limit, you'll only really find the large mags for .22LR
 
"For a bolt action there is no limit, unless the rifle is a variant of a Lee Enfield, in which case the limit is 10"...

Wrong. A bolt action centre fire rifle has a max capacity of 10 rounds. A Lee Enfield variant is not mentioned in the legislation.
 
You mean other than this part:

"(ii) is a rifle of the type commonly known as the “Lee Enfield” rifle, where the magazine is capable of containing not more than 10 cartridges of the type for which the magazine was originally designed"

There is no regulation or law governing the capacity of a magazine for a bolt action rifle therefore there is no limit. Ten is the limit for a semiautomatic rifle.
 
Here is the only fully correct answer:


3. (1) Any cartridge magazine

(a) that is capable of containing more than five cartridges of the type for which the magazine was originally designed and that is designed or manufactured for use in

(i) a semi-automatic handgun that is not commonly available in Canada,

(ii) a semi-automatic firearm other than a semi-automatic handgun,

(iii) an automatic firearm whether or not it has been altered to discharge only one projectile with one pressure of the trigger,

(iv) the firearms of the designs commonly known as the Ingram M10 and M11 pistols, and any variants or modified versions of them, including the Cobray M10 and M11 pistols, the RPB M10, M11 and SM11 pistols and the SWD M10, M11, SM10 and SM11 pistols,

(v) the firearm of the design commonly known as the Partisan Avenger Auto Pistol, and any variant or modified version of it, or

(vi) the firearm of the design commonly known as the UZI pistol, and any variant or modified version of it, including the Micro-UZI pistol; or

(b) that is capable of containing more than 10 cartridges of the type for which the magazine was originally designed and that is designed or manufactured for use in a semi-automatic handgun that is commonly available in Canada.

(2) Paragraph (1)(a) does not include any cartridge magazine that

(a) was originally designed or manufactured for use in a firearm that

(i) is chambered for, or designed to use, rimfire cartridges,

(ii) is a rifle of the type commonly known as the “Lee Enfield” rifle, where the magazine is capable of containing not more than 10 cartridges of the type for which the magazine was originally designed, or

(iii) is commonly known as the U.S. Rifle M1 (Garand) including the Beretta M1 Garand rifle, the Breda M1 Garand rifle and the Springfield Armoury M1 Garand rifle;

(b) is not a reproduction and was originally designed or manufactured for use in a firearm that

(i) is commonly known as the Charlton Rifle,

(ii) is commonly known as the Farquhar-Hill Rifle, or

(iii) is commonly known as the Huot Automatic Rifle;

(c) is of the “drum” type, is not a reproduction and was originally designed or manufactured for use in a firearm commonly known as

(i) the .303 in. Lewis Mark 1 machine-gun, or any variant or modified version of it, including the Lewis Mark 1*, Mark 2, Mark 2*, Mark 3, Mark 4, Lewis SS and .30 in. Savage-Lewis,

(ii) the .303 in. Vickers Mark 1 machine-gun, or any variant or modified version of it, including the Mark 1*, Mark 2, Mark 2*, Mark 3, Mark 4, Mark 4B, Mark 5, Mark 6, Mark 6* and Mark 7, or

(iii) the Bren Light machine-gun, or any variant or modified version of it, including the Mark 1, Mark 2, Mark 2/1, Mark 3 and Mark 4;

(d) is of the “metallic-strip” type, is not a reproduction and was originally designed or manufactured for use in conjunction with the firearm known as the Hotchkiss machine-gun, Model 1895 or Model 1897, or any variant or modified version of it, including the Hotchkiss machine-gun, Model 1900, Model 1909, Model 1914 and Model 1917, and the Hotchkiss machine-gun (Enfield), Number 2, Mark 1 and Mark 1*;

(e) is of the “saddle-drum” type (doppeltrommel or satteltrommel), is not a reproduction and was originally designed or manufactured for use in the automatic firearms known as the MG-13, MG-15, MG-17, MG-34, T6-200 or T6-220, or any variant or modified version of it; or

(f) is of the “belt” type consisting of a fabric or metal belt, is not a reproduction and was originally designed or manufactured for the purpose of feeding cartridges into a automatic firearm of a type that was in existence before 1945.

(3) Paragraph (1)(b) does not include any cartridge magazine that

(a) is of the “snail-drum” type (schneckentrommel) that was originally designed or manufactured for use in a firearm that is a handgun known as the Parabellum-Pistol, System Borchardt-Luger, Model 1900, or “Luger”, or any variant or modified version of it, including the Model 1902, Model 1904 (Marine), Model 1904/06 (Marine), Model 1904/08 (Marine), Model 1906, Model 1908 and Model 1908 (Artillery) pistols;

(b) was originally designed or manufactured for use in a firearm that is a semi-automatic handgun, where the magazine was manufactured before 1910;

(c) was originally designed or manufactured as an integral part of the firearm known as the Mauser Selbstladepistole C/96 (“broomhandle”), or any variant or modified version of it, including the Model 1895, Model 1896, Model 1902, Model 1905, Model 1912, Model 1915, Model 1930, Model 1931, M711 and M712; or

(d) was originally designed or manufactured for use in the semi-automatic firearm that is a handgun known as the Webley and Scott Self-Loading Pistol, Model 1912 or Model 1915.

(4) A cartridge magazine described in subsection (1) that has been altered or re-manufactured so that it is not capable of containing more than five or ten cartridges, as the case may be, of the type for which it was originally designed is not a prohibited device as prescribed by that subsection if the modification to the magazine cannot be easily removed and the magazine cannot be easily further altered so that it is so capable of containing more than five or ten cartridges, as the case may be.

(5) For the purposes of subsection (4), altering or re-manufacturing a cartridge magazine includes

(a) the indentation of its casing by forging, casting, swaging or impressing;

(b) in the case of a cartridge magazine with a steel or aluminum casing, the insertion and attachment of a plug, sleeve, rod, pin, flange or similar device, made of steel or aluminum, as the case may be, or of a similar material, to the inner surface of its casing by welding, brazing or any other similar method; or

(c) in the case of a cartridge magazine with a casing made of a material other than steel or aluminum, the attachment of a plug, sleeve, rod, pin, flange or similar device, made of steel or of a material similar to that of the magazine casing, to the inner surface of its casing by welding, brazing or any other similar method or by applying a permanent adhesive substance, such as a cement or an epoxy or other glue.
 
Here is the only fully correct answer:


3. (1) Any cartridge magazine

(a) that is capable of containing more than five cartridges of the type for which the magazine was originally designed and that is designed or manufactured for use in

(i) a semi-automatic handgun that is not commonly available in Canada,

(ii) a semi-automatic firearm other than a semi-automatic handgun,

(iii) an automatic firearm whether or not it has been altered to discharge only one projectile with one pressure of the trigger,

(iv) the firearms of the designs commonly known as the Ingram M10 and M11 pistols, and any variants or modified versions of them, including the Cobray M10 and M11 pistols, the RPB M10, M11 and SM11 pistols and the SWD M10, M11, SM10 and SM11 pistols,

(v) the firearm of the design commonly known as the Partisan Avenger Auto Pistol, and any variant or modified version of it, or

(vi) the firearm of the design commonly known as the UZI pistol, and any variant or modified version of it, including the Micro-UZI pistol; or

(b) that is capable of containing more than 10 cartridges of the type for which the magazine was originally designed and that is designed or manufactured for use in a semi-automatic handgun that is commonly available in Canada.

(2) Paragraph (1)(a) does not include any cartridge magazine that

(a) was originally designed or manufactured for use in a firearm that

(i) is chambered for, or designed to use, rimfire cartridges,

(ii) is a rifle of the type commonly known as the “Lee Enfield” rifle, where the magazine is capable of containing not more than 10 cartridges of the type for which the magazine was originally designed, or

(iii) is commonly known as the U.S. Rifle M1 (Garand) including the Beretta M1 Garand rifle, the Breda M1 Garand rifle and the Springfield Armoury M1 Garand rifle;

(b) is not a reproduction and was originally designed or manufactured for use in a firearm that

(i) is commonly known as the Charlton Rifle,

(ii) is commonly known as the Farquhar-Hill Rifle, or

(iii) is commonly known as the Huot Automatic Rifle;

(c) is of the “drum” type, is not a reproduction and was originally designed or manufactured for use in a firearm commonly known as

(i) the .303 in. Lewis Mark 1 machine-gun, or any variant or modified version of it, including the Lewis Mark 1*, Mark 2, Mark 2*, Mark 3, Mark 4, Lewis SS and .30 in. Savage-Lewis,

(ii) the .303 in. Vickers Mark 1 machine-gun, or any variant or modified version of it, including the Mark 1*, Mark 2, Mark 2*, Mark 3, Mark 4, Mark 4B, Mark 5, Mark 6, Mark 6* and Mark 7, or

(iii) the Bren Light machine-gun, or any variant or modified version of it, including the Mark 1, Mark 2, Mark 2/1, Mark 3 and Mark 4;

(d) is of the “metallic-strip” type, is not a reproduction and was originally designed or manufactured for use in conjunction with the firearm known as the Hotchkiss machine-gun, Model 1895 or Model 1897, or any variant or modified version of it, including the Hotchkiss machine-gun, Model 1900, Model 1909, Model 1914 and Model 1917, and the Hotchkiss machine-gun (Enfield), Number 2, Mark 1 and Mark 1*;

(e) is of the “saddle-drum” type (doppeltrommel or satteltrommel), is not a reproduction and was originally designed or manufactured for use in the automatic firearms known as the MG-13, MG-15, MG-17, MG-34, T6-200 or T6-220, or any variant or modified version of it; or

(f) is of the “belt” type consisting of a fabric or metal belt, is not a reproduction and was originally designed or manufactured for the purpose of feeding cartridges into a automatic firearm of a type that was in existence before 1945.

(3) Paragraph (1)(b) does not include any cartridge magazine that

(a) is of the “snail-drum” type (schneckentrommel) that was originally designed or manufactured for use in a firearm that is a handgun known as the Parabellum-Pistol, System Borchardt-Luger, Model 1900, or “Luger”, or any variant or modified version of it, including the Model 1902, Model 1904 (Marine), Model 1904/06 (Marine), Model 1904/08 (Marine), Model 1906, Model 1908 and Model 1908 (Artillery) pistols;

(b) was originally designed or manufactured for use in a firearm that is a semi-automatic handgun, where the magazine was manufactured before 1910;

(c) was originally designed or manufactured as an integral part of the firearm known as the Mauser Selbstladepistole C/96 (“broomhandle”), or any variant or modified version of it, including the Model 1895, Model 1896, Model 1902, Model 1905, Model 1912, Model 1915, Model 1930, Model 1931, M711 and M712; or

(d) was originally designed or manufactured for use in the semi-automatic firearm that is a handgun known as the Webley and Scott Self-Loading Pistol, Model 1912 or Model 1915.

(4) A cartridge magazine described in subsection (1) that has been altered or re-manufactured so that it is not capable of containing more than five or ten cartridges, as the case may be, of the type for which it was originally designed is not a prohibited device as prescribed by that subsection if the modification to the magazine cannot be easily removed and the magazine cannot be easily further altered so that it is so capable of containing more than five or ten cartridges, as the case may be.

(5) For the purposes of subsection (4), altering or re-manufacturing a cartridge magazine includes

(a) the indentation of its casing by forging, casting, swaging or impressing;

(b) in the case of a cartridge magazine with a steel or aluminum casing, the insertion and attachment of a plug, sleeve, rod, pin, flange or similar device, made of steel or aluminum, as the case may be, or of a similar material, to the inner surface of its casing by welding, brazing or any other similar method; or

(c) in the case of a cartridge magazine with a casing made of a material other than steel or aluminum, the attachment of a plug, sleeve, rod, pin, flange or similar device, made of steel or of a material similar to that of the magazine casing, to the inner surface of its casing by welding, brazing or any other similar method or by applying a permanent adhesive substance, such as a cement or an epoxy or other glue.

As someone with casual knowledge of guns my eyes glazed over......
 

Exactly

No answer in this thread yet is correct. Some are close, but every answer contains at least one error.

The best comment was that the law makes no sense, logic has nothing to do with Canadian gun law which is arbitrary and inconsistent.

I will take a stab at it:

1. For a bolt action there is no limit, unless the rifle is a variant of a Lee Enfield, in which case the limit is 10

2. If the rifle is semiautomatic the limit is 5 unless it is a .22 or other rimfire in which case there is no limit

3. For a handgun the limit is ten of the originally intended rounds

4. The limit is based on the original purpose so if a 10 round pistol magazine happens to work in your rifle that is OK, similarly if you have a .45 magazine and 9mm happens to work in it, you can legally load as many 9mm as fit, so long as only 10 .45 rounds fit

5. You can have a larger magazine provided a rivet is put in blocking it to the required number, because only a criminal would have and use a dremel to remove the rivet


"because only a criminal would have and use a dremel to remove the rivet"
lmao
 
Maximum for hunting is 3 . If your hunting you must have a plug if it holds more then a total of 3 shells.

I inherited his 30.06. That has a clip which holds I think 4 or 5 bullets. Does that need a plug too? (edited: didn't see Fuji's answer so I guess magazine limit is ok?)
 
No answer in this thread yet is correct. Some are close, but every answer contains at least one error.

The best comment was that the law makes no sense, logic has nothing to do with Canadian gun law which is arbitrary and inconsistent.

I will take a stab at it:

1. For a bolt action there is no limit, unless the rifle is a variant of a Lee Enfield, in which case the limit is 10

2. If the rifle is semiautomatic the limit is 5 unless it is a .22 or other rimfire in which case there is no limit

3. For a handgun the limit is ten of the originally intended rounds

4. The limit is based on the original purpose so if a 10 round pistol magazine happens to work in your rifle that is OK, similarly if you have a .45 magazine and 9mm happens to work in it, you can legally load as many 9mm as fit, so long as only 10 .45 rounds fit

5. You can have a larger magazine provided a rivet is put in blocking it to the required number, because only a criminal would have and use a dremel to remove the rivet



Fuji, my late dad used* to have a semi-automatic .22 Franchi rifle. It could hold up to 15 rounds in a tube inside the stock which you insert through the butt. You mean to tell me that there's no limit with that?


*Unfortunately, his cottage was broken into in the 70s and it was stolen. Police reported of course for the break in.
 
I can now relate to what Cunnilinguist, Hey Hey, AK-47 and Fuji say about the onerous gun laws in Canada, and the automatic criminality which is stupid.

I've had to have mine possessed by a licensed person because the renewal for my POL was sent to my old address. I never thought that I had to call before the expiry date because I confused the abolition of the National Gun Registry with the need to maintain a POL or PAL.

I think I have to take the course now. It's not an automatic renewal. If anyone has some advice, I'd like to hear it, although hunters and gun collectors at work have chimed in, but I haven't delved fully into it yet. I don't want to lose heirlooms and it would be nice to target shoot again one day.

(I may still have a chance in the future to purchase a used Mannlicher Carcano 6.5 mm carbine like the one Lee Harvey Oswald allegedly used, but I'm only looking to renew my POL for now).
 
I can now relate to what Cunnilinguist, Hey Hey, AK-47 and Fuji say about the onerous gun laws in Canada, and the automatic criminality which is stupid.

I've had to have mine possessed by a licensed person because the renewal for my POL was sent to my old address. I never thought that I had to call before the expiry date because I confused the abolition of the National Gun Registry with the need to maintain a POL or PAL.

I think I have to take the course now. It's not an automatic renewal. If anyone has some advice, I'd like to hear it, although hunters and gun collectors at work have chimed in, but I haven't delved fully into it yet. I don't want to lose heirlooms and it would be nice to target shoot again one day.

(I may still have a chance in the future to purchase a used Mannlicher Carcano 6.5 mm carbine like the one Lee Harvey Oswald allegedly used, but I'm only looking to renew my POL for now).

I don't want to sound overly critical, but the fact that you had a POL, but didn't know the difference between a POL/PAL and the gun registry, would suggest that maybe you should take the one or 2 day PAL course. Above all, its a question of safety. Growing up with toy guns and watching TV and movies where guns are prevalent makes a lot of viewers think they know all there is to know, but you would be surprized to find out the stuff you didn't know about the safe storage, transportation and handling of firearms.

In any case, I don't want to be shooting besides someone who doesn't know what he's doing (but thinks he does), whether it be at the range or in the woods. The prevalence of legal handguns in the US, without the requirement to know how to use them makes my skin crawl.
 
Fuji, my late dad used* to have a semi-automatic .22 Franchi rifle. It could hold up to 15 rounds in a tube inside the stock which you insert through the butt. You mean to tell me that there's no limit with that?

That is correct . It's a 22 so there's no limit . From a single shot , tubular magazine or a large capacity magazine . No limit on a 22LR .
 
I can now relate to what Cunnilinguist, Hey Hey, AK-47 and Fuji say about the onerous gun laws in Canada, and the automatic criminality which is stupid.

I've had to have mine possessed by a licensed person because the renewal for my POL was sent to my old address. I never thought that I had to call before the expiry date because I confused the abolition of the National Gun Registry with the need to maintain a POL or PAL.

I think I have to take the course now. It's not an automatic renewal. If anyone has some advice, I'd like to hear it, although hunters and gun collectors at work have chimed in, but I haven't delved fully into it yet. I don't want to lose heirlooms and it would be nice to target shoot again one day.

(I may still have a chance in the future to purchase a used Mannlicher Carcano 6.5 mm carbine like the one Lee Harvey Oswald allegedly used, but I'm only looking to renew my POL for now).

You're a criminal, and there is a minimum mandatory sentence if you are caught. The judge's hands will be tied -- no leniency, you will see the inside of a prison. That's the state of Canadian gun law. Go file your paperwork before Toronto Police get wind of it.
 
I don't want to sound overly critical, but the fact that you had a POL, but didn't know the difference between a POL/PAL and the gun registry, would suggest that maybe you should take the one or 2 day PAL course. Above all, its a question of safety. Growing up with toy guns and watching TV and movies where guns are prevalent makes a lot of viewers think they know all there is to know, but you would be surprized to find out the stuff you didn't know about the safe storage, transportation and handling of firearms.

In any case, I don't want to be shooting besides someone who doesn't know what he's doing (but thinks he does), whether it be at the range or in the woods. The prevalence of legal handguns in the US, without the requirement to know how to use them makes my skin crawl.

Not offended. I've done some shooting and watched my dad clean guns and handle them with care. I know the difference between the POL and the PAL, but was confused with the Gun Registry. At the time of the Gun Registry, the firearms were/are stored in a locked metal cabinet, and the ammo is locked offsite. I've also done some reading, including the manuals with the guns.

I don't mind to take that course in any event. It would be a good thing to do. (I don't have hand guns).
 
You're a criminal, and there is a minimum mandatory sentence if you are caught. The judge's hands will be tied -- no leniency, you will see the inside of a prison. That's the state of Canadian gun law. Go file your paperwork before Toronto Police get wind of it.

I don't have possession. But I understand from another person who renewed that he was able to do it, as long as another licensed person had possession. He called the RCMP who guided him through it.
 
Slightly off-topic, but "schneckentrommel" and "selbstladepistole" are great words. Those Germans....
 
I inherited his 30.06. That has a clip which holds I think 4 or 5 bullets. Does that need a plug too? (edited: didn't see Fuji's answer so I guess magazine limit is ok?)

Firstly, plugs are used to limit capacity in tubular magazines like those under the barrel of a shotgun. Box magazines are limited with pins or rivets or gigantic followers. Secondly, 3 round maximum (2 in the tube, 1 in the chamber) is a waterfowl hunting restriction. You can't hunt waterfowl with a rifle so it never has to be limited to a 3 round capacity.
 
Firstly, plugs are used to limit capacity in tubular magazines like those under the barrel of a shotgun. Box magazines are limited with pins or rivets or gigantic followers. Secondly, 3 round maximum (2 in the tube, 1 in the chamber) is a waterfowl hunting restriction. You can't hunt waterfowl with a rifle so it never has to be limited to a 3 round capacity.

Okay thanks C L but with respect to the normal magazine of a 30.06. Any restrictions (IIRC, his Browning magazine is internal and swings down upon release)?
 
Not offended. I've done some shooting and watched my dad clean guns and handle them with care. I know the difference between the POL and the PAL, but was confused with the Gun Registry. At the time of the Gun Registry, the firearms were/are stored in a locked metal cabinet, and the ammo is locked offsite. I've also done some reading, including the manuals with the guns.

I don't mind to take that course in any event. It would be a good thing to do. (I don't have hand guns).

Actually you don't have to keep the ammo separate from your guns . You can lock everything up together as long as there is no ammo in the gun . Example ... if you had a 45cal hand gun you could have ammo in the magazine right beside your hand gun in the safe . You also do not need to lock your hand gun as long as it's in a proper safe . I'm not talking about some shitty steel cabinet that you can buy at Canadian Tire . A real safe where a crowbar or a heavy duty screw driver can't jam open the door .

I know of a guy who had his house broken into and he lost $20,000.00 worth of guns . One gun was a very expensive 4 barrel set . I said to him afterwards and asked him if he was stupid or what . Guns that were worth that much money and ones that can never be replaced and he locks them in a CHEAP Canadian Tire steel box . The thief just used a heavy screw driver and jammed the door open . What do you expect when a steel box lock is made of cheap white steel .

Even the cop who went to write the report was surprised because he has the same cheap steel box.

If you wish to be a gun owner then spend the damn money and buy a proper gun safe . They're not that expensive and many times the guns are worth more then the safe . You can even load the bottom of the safe with 25lb bags of lead shot . No one is going to be able to steal that safe with out being noticed . Only way of getting in is with a torch to cut a hole in the wall . That will start the place on fire and the contents of the safe can go up in flames . Not too many people walk around with a set of torches in their back pocket .
 
Secondly, 3 round maximum (2 in the tube, 1 in the chamber) is a waterfowl hunting restriction. You can't hunt waterfowl with a rifle so it never has to be limited to a 3 round capacity.

It is also a deer hunting restriction . No more then 3 shells can be in the gun at any time . Especially in Southern Ont were we have the Controlled Deer hunt for shotgun only . No rifles at all .