Car question - car shakes when braking

If the vibrated right away after the brake job, then it is likely the rotors are not seated properly or the did not clean the hubs before installing the rotors so there is rust and dirt preventing the rotors from sitting true.
 
Could be as simple as lug nuts over tightened, when wheels went back on. At this point good or bad rotors will not make a difference if mechanic got happy with impact gun. This would be most common cause of new rotors causing brake shutter.
 
Thanks for all the help and suggestions. It turns out to be bad rotors. I replaced them and now the ride is smooth when braking.
 
Have a mechanic carefully evaluate the action of the calippers. They could be grabbing excessively if the slider pins are bent or have excessive dirt/rust build up. Perhaps in the course of handling the calipers the mechanic moved or redeposited some gunk which was not previously interfering with action but now is. Also double check if Fluid was brought back to proper level.