Fovourite Power/Cordless Drill

Favourite power tool

  • Dewalt

    Votes: 12 48.0%
  • Milwaukee

    Votes: 2 8.0%
  • Makita

    Votes: 6 24.0%
  • Rigid

    Votes: 3 12.0%
  • Ryobi

    Votes: 1 4.0%
  • Bosch

    Votes: 0 0.0%
  • Hilti

    Votes: 0 0.0%
  • Other, post in thread

    Votes: 1 4.0%

  • Total voters
    25

BallzDeep

New member
Feb 12, 2007
2,265
5
0
Doing some research and was wondering what you favourite power/cordless tool is for construction use and why?

I'm looking at a couple small business ventures and tool/drill sales for contractors is one of them, and yes I've heard of Home Depot.
 
what are you going to use it for and what work load will it be doing?
 
papasmerf said:
what are you going to use it for and what work load will it be doing?

Like papa says; You can't go wrong with the main name brand drills, that said alot go missing on job sites because of the ease of sneaking away with them, most times it's your own guys. If this might be the case alot of contractors go for the cheaper ones because longevitity isn't an issue, cost is and it's a whole lot cheaper to replace a cheaper drill than the more expensive models. If it is being used on a closed job site, home renos, then get the best drill for your money, battery life being the biggest issue and recharging docks for spares.
 
great experience with my ryobi combo kit (jigsaw, hammer drill, circular saw, vac and flashlight combo)

keyless chuck with lock (important for hammer)

batteries lasted almost 7 yrs before replacement - and were available as a 2-pack at home depot for under $80!
 
I have never had a technical probelm with eitrher Dewalt or Ryobi tools, the problem is that they tend to develope legs when you are not right on top of them.
 
I have to agree with RIGID. I know of two people who'e had nothing to say but amazing things about the lifetime warranty...and one of them was for the battery.
 
Ruyobi has one thing over alot of others...they are not overly priced.
Thier batteries are also interchanageable from thier whole line....
The older batteries work on the new line of LIon tools as well as the LIon work on the older......the only thing is you need a LIon charger for the LION batteries..but other than that they are all interchanageble......

I work commercial construction and I can keep up with all the big name brands...and if one goes missing or does break...it is inexspensive to replace...compared to a high priced unit.
 
a little lo-down:

Panasonic makes all rechargeable batteries for tools... in fact they make almost all of the rechargeable batteries in the entire world for anything.

in 2007, all of the brand names listed above have joined a coalition with the world's major retailers and agreed that a rechargeable battery should only last 7 weeks of full time use. The batteries could easily last over 10 years, but this is a hidden 'passive' profit center for the tool brand manufacturers, the tool retailers and else. (this is also true with cell phones and laptop batteries, though they use different technology in their batteries- more on this below)

anyways, so on ANY name brand tool you buy today, expect the batteries to only take charge for a few months if you are a heavy use contractor, or 1-3 years as a handyman or occassional craftsman backyard shop type. The longest these batteries last on a shelf is even 5 years, so don't expect to get that with any home use...

the caveat to this is if you buy Panasonic brand tools with their own batteries. They make the higher quality tools and batteries for their own product line... and also why you'll never see a Panny tool at any retailer, but you'll usually see them around 'real' contractor sites.

Also, don't let a power tool battery ever go dead except on first use. It doesn't have a memory like your cellphone battery. Instead, keep the battery baked full and ready to use for each time. It will last longer that way... that is the way they are designed.

as for cordless drills, here are my reviews:

Dewalt- the most common, Home Depot owned now, once was known for quality is now mass production. drills are powerful and long lasting but unnecessarily heavy and uncomfortable for long hour use.

Milwaukee- not known for their cordless tools, rather a leader in 'corded' power. not a drill, but their cordless sawzall is incredible.

Makita- *My favourite. it's the Toyota of tools... chances are that if it's a makita, it can be tuned up easily, is reliable and built for long use. they are also more comfortable, smaller and don't lack any power.

Rigid- another HD owned company. Heavy Power no doubt, but heavy comes with the good and bad. heavy get's uncomfortable.

Ryobi- HomeDepot owned and is an entry-level low price value brand. here, you'll find irreplaceable bushings and plastic bearings... but, can last long for little use hobbies without complaint. they are nice because they are usually ergonomically correct and lightweight.

Bosch-people just by these because of what dirkd101 says.. just to be different. their models are either Makita's or Ridgid's in different 'outfits'

Hilti- their hi-end products are good ($2000 tools and up), but their cordless drills are like Bosch and Hitachi... just to be different. comes with lower quality housings, but easy to replace bushings and bearings.

dirkd101 said:
alot of contractors go for the cheaper ones because longevitity isn't an issue, cost is and it's a whole lot cheaper to replace a cheaper drill than the more expensive models.

true for handyman types or jack of all trades. However, specialists such as heavily productive electricians will opt for more expensive high quality tools with replaceable bushings, motor and bearings, etc... for them, they need to be productive. they can't afford a 2 hour break from the job site to go to HD or Lowes and figure out the best deal. Instead, they'll go to their contractor supply store and the parts and or model will be sitting there in stock ready to go for them.

i guess different levels of what people think a 'contractor' is... but, they are all contractors if they take payment for working out the deals of a contract... ;)
 
yes, sukdeep, B&D are the owners of DeWalt... but what I mean is they are under agreement to a private treaty governed through Home Depot. not much is public about the details... hence conspiracy theory. lol... i don't even know what to call it ... some kind of partnership... simply stated: B&D get's their instructions on what to build solely from Home Depot.

so to sum up my previous post, I prefer Makita... but it's a personal choice.

probably the best value still is RYOBI for cordless drills. on pretty much every jobsite there is (except for the specialist electrician like mentioned above), differences in cordless drills makes perhaps the smallest impact on performance, so go with the high value/low cost option.

once you get into saws, reciprocating, circular or whatever, though- brands do make a big difference. same with hammer drills, rotary saws, etc... but cordless drills, the better price you can get, the more sense it makes to go with that one regardless of the name behind it.
 
herames said:
i am curious to who makes the craftsman line..is it possibly by Ryobi who makes shit for Crapy Tire

sunrise tools makes for both of them. they were Brampton based, but now run out of North Carolina... but everything is made in India or China.
 
my quick 2 cents.
my shop primarily is HITACHI, very reliable & reasonable price wise. they are used probably 5 to 6 hours each & every day.

RYOBI never makes it passed the first month, battery won't take a charge.

my preference is MAKITA, but too pricey to give to guys who don't take care of them

I also recently picked up a RIGID 2 pack of small size drill/impact wrench & they have been fantastic for the majority of what I need to do around the house.

DEWALT - too bulky for frequent use.
 
Would it make sense to open a small business to sell cordless or other power tools to cater to the contractors, or is the competition too stiff nowadays with everybody selling them? Also what is the profit on power tools?

Also would like to sell quality hand tools like Klein, Greenlee, Stanley etc. Anyone think there is a market for this or is it too flooded with the Big box stores. Try to cater to the contractors that don't always want to stand in line at those places.

The HD mania has kind of worn off and many small retailers are still in business, agree disagree, any thoughts.
 
BallzDeep said:
Would it make sense to open a small business to sell cordless or other power tools to cater to the contractors, or is the competition too stiff nowadays with everybody selling them? Also what is the profit on power tools?

Also would like to sell quality hand tools like Klein, Greenlee, Stanley etc. Anyone think there is a market for this or is it too flooded with the Big box stores. Try to cater to the contractors that don't always want to stand in line at those places.

The HD mania has kind of worn off and many small retailers are still in business, agree disagree, any thoughts.
If you can be 20% less to make up for the inconvience of going to another vendor then you have a shot.
 
BallzDeep said:
Would it make sense to open a small business to sell cordless or other power tools to cater to the contractors, or is the competition too stiff nowadays with everybody selling them? Also what is the profit on power tools?

Also would like to sell quality hand tools like Klein, Greenlee, Stanley etc. Anyone think there is a market for this or is it too flooded with the Big box stores. Try to cater to the contractors that don't always want to stand in line at those places.

The HD mania has kind of worn off and many small retailers are still in business, agree disagree, any thoughts.
If you can be 20% to make up for the inconvenience of going to another vendor then you have a shot.
 
Nothing does the job like a good Rigid Tool

no homo