Water Pipe Corrosion
Under certain conditions, copper, steel and iron pipes and fittings are vulnerable to corrosion attacks. The joining of different metals like copper and aluminum or copper and steel causes corrosion in piping. Metal pipe corrosion is also called galvanic corrosion and is a result of electrochemical electron exchange from the differential galvanic properties between dissimilar metals. Plumbers control or prevent corrosion in pipes by using anti corrosion pipes or at least the same types of metals for plumbing connections. When corrosion resistant pipes are unavailable and plumbers cannot use the same metal - they will install pipe corrosion protection in the form of a fiber or plastic connector between the joints to prevent different metals from touching. The following variables influence the rate of corrosion in metal piping:
- Chemical composition of water
- Low pH values of water
- Amount of oxygen in water
- Water pressure in pipe
- Galvanic corrosion
- Water temperature
Copper Pipe Corrosion
Pitting corrosion causes pinhole leaks in copper water pipes. Copper pipe corrosion leads to the formation of small pits on restricted areas of the metal surface – resulting in leaky pipes that can waste as much as 70 gallons of water per day. Copper pipe corrosion forms for unknown reasons, but
many plumbers attribute the chemistry of water passing through copper pipes to the development of pits.