Burning hardwood flooring

Brill

Well-known member
Jun 29, 2008
8,671
1,194
113
Toronto
I took up all the oak flooring in an old house, cut it into 16" lengths and boxed it all up. It's several truckloads I've got in storage, ready to burn.

Question, do you think it's safe to burn in an indoor fireplace? There are several coats of varnish and varathane over the decades, but it seems like a waste to throw it away. I figured the toxic level is relatively low, what do you think?

Wish tboy was here for his sage advice...
 
I took up all the oak flooring in an old house, cut it into 16" lengths and boxed it all up. It's several truckloads I've got in storage, ready to burn.

Question, do you think it's safe to burn in an indoor fireplace? There are several coats of varnish and varathane over the decades, but it seems like a waste to throw it away. I figured the toxic level is relatively low, what do you think?

Wish tboy was here for his sage advice...

I didn't think it sounded like a very good idea :o, but checked with my friends Google and Wiki:


Thats Highly dangerous as varnished, painted, and green treated woods release terrible toxins as they burn. Residue from treated wood sticks to the chiminey liner, if enough is burned, a liquid form of the residue will acumulate and run down the chimney liner.

Read more: http://wiki.answers.com/Q/Is_it_safe_to_burn_wood_with_varnish_in_a_fireplace#ixzz1EdvDbup3

...................................


Salvaged firewood or other scraps can save you a lot of money when it comes to heating your home with wood. But there are certain wood products and other items that you should avoid for health and safety reasons.

Many of these will produce hazardous fumes indoors, as well as chimney emissions that would be an environmental concern. Some also pose additional risks to your stove metals or can create a hazardous build-up of creosote in your chimney. Additional information is also noted.
•Painted or varnished wood, trim or other wood by-products
•Pressure-treated lumber - due to the treatment compounds
•Driftwood - salt water driftwood contains some amount of salt which is corrosive. When heated, corrosion is accelerated and toxic fumes are produced. Fresh water driftwood may contain silt and gravel.
•All engineered sheet goods because of the glue compounds used in the layering process, including but not limited to:
•Plywood
•Particle board
•Press board
•Orientated Strand Board (OSB)
•Medium Density Fibreboard (MDF)
•Green wood - wood that is not dry will not produce any heat, you'll be just trying to dry it in your stove. It will produce a lot of smoke and creosote.


.................

I think the answer is NO!
 
I took up all the oak flooring in an old house, cut it into 16" lengths and boxed it all up. It's several truckloads I've got in storage, ready to burn.

Question, do you think it's safe to burn in an indoor fireplace? There are several coats of varnish and varathane over the decades, but it seems like a waste to throw it away. I figured the toxic level is relatively low, what do you think?

Wish tboy was here for his sage advice...

Well, if it is from and old house the flooring is probably pretty worm with most of the finish gone so I'd burn it...except someone would pay you good coin for the stuff. Aged hardword can be easily put through a planer and the darker patina of the wood is sought by some doing restoration work.
 
If your house burns down due to that insurance will walk away, leaving you with the bill...and..nothing.

That's tempting, I suspect my property is worth more if the house was gone. I'm seeing a lot of perfectly good homes in the neighbourhood being demolished.

Too late to donate it, it's already chopped up and stacked in boxes. I offered to give it all to a renovator friend before I cut it up but he wasn't interested in it.
 
If you had just bundled it, and saved the work of butchering it into fireplace lengths it would have restoration value to someone; I've done quite well with old flooring, it matches in better than new for patching. Try Habitat for Humanity.

DO NOT BURN IT!. As others have said, it's toxic—is just a little poison good?—and bad for the flue as well as the environment. Since every indoor fire wastes house heat you paid for, when burned in anything but a high-tech sealed modern wood-burner, better you should let it rot away naturally somewhere safe. Landfill.

Any of the City transfer stations will take it at less than $100 a tonne (toronto.ca solid waste) as will Turtle Island down on Cherry St. Chimney-cleaning the varathane and varnish guck will cost more. As will your Health Taxes if you burn it.
 
Last edited:
Options:
a) Strip the finish by running the wood through a planer or joiner.
b) Find someone with a wood stove configured so the combustion products don't blow through the house.
c) Use it for a back yard campfire (not in city.)

Most people that do (b) or (c) have a pretty good idea of which wood will burn well. They will be able to tell quickly if the wood is safe for burning.
 
It's too bad you cut it up in to 16" lengths before you check on its market value as recycled flooring. Please tell me it wasn't oak. I've seen sources claim $4.00 sq ft+.