Bicycle experts please weigh in

Nice bike but IMHO a waste of money. Most Northern Americans can stand to loose several pounds or more. So unless you have an extremely low BMI you be best to loose the weight off of you rather than the bike.

Carbon is great but awfully touchy. You are really going to have to watch how the bike is treated.

Only the fork is carbon, the frame is still aluminum, it weighs a 1/3rd less than my current bike, which is a hybrid, nothing to sneeze at. My buddy has been trying to get me on a road bike, I think a cyclocross bike is a great compromise.
 
Only the fork is carbon, the frame is still aluminum, it weighs a 1/3rd less than my current bike, which is a hybrid, nothing to sneeze at. My buddy has been trying to get me on a road bike, I think a cyclocross bike is a great compromise.

Looks like carbon.

Not a bad setup then. That is what I have. I have the Sr500. I think the last to be made in the US. I wish I had visited the factory before they shipped everything over seas. It is only a few hours east of here.

Been wanting to ride my bike out there too. Now I have a Jamis touring bike it would make sense to ride it but it would be cooler if I arrived on my Cannodale. I used to use it for touring anyway.
 
That CAADX will cost me like $1.8K before tax, that's probably on the upper end of my budget and my skill level. Ever since my buddy planted the seed, I've wanted to go faster. Now I know it's mostly the rider, but weight and aerodynamics will help. My current bike weighs like 30 lbs. and with the flat bars, I can help but feel like a parachute when I take long, fast descents. My current max speed on Strava is like 44 km/h, would love to increase that.

It's kinda like when I got into archery and bowhunting, I started with basic, versatile and relatively cost effective compound bow. When I realized how much I enjoyed it, I eventually desired more performance. I realize that at my current skill level, I'll probably only see a ~5 minute difference on my usual, 24 km route but it has much more potential to grow into and I've grown to like the acceleration and snappy handling of something closer in geometry to a road bike.
 
You have to get equipment to fit your needs. In 1998 I bought a bike for $1K. Now after 18 years it owes me nothing at +150,000 km. ( approx 8000 km / yr. ) My bike is all worn out. The quality got better and prices went lower on bikes. My needs are to exercise, lower my heart rate and get rid of bad cholesterol in my system. I have a $500 Schwinn I bought at Canadian Tire at half price on special. If I see a good road bike at half price I might pick one up. They have 2 or 3 bikes on special each week at CDN Tire. My needs are quite simple now a days, no need for the $5-8K bikes. I know several guys with these high priced bikes. They ride them once a month. Where as I ride my bike every morning and evening it is not raining.
 
Damn! Noticed the rear tire on my bike was flat yesterday. Called the local bike shop. One week waiting period but they could reduce that to 3 days for me.

Decided to fix the flat myself. 3 hours later, done.

Question: What is the life expectancy of a tube? (I don't bother with the patching stuff, I simply install a new tube.)
 
http://jalopnik.com/5816286/five-saddles-to-save-your-penis-from-your-bike

images

http://forums.bicycling.com/topic/54635607130901075

The saleslady said a split seat saddle would be good for me.


I actually had a split seat saddle on my previous bike. It was also great for allowing rainwater to drain off.
I love this type of a product.

I use this one and probably the best innovative product I have ever bought and solved my junk discomfort problem. I dont bike a lot but a few times a year I do 75-100km and this thing is so amazing. I have the one with a double bar for my weight requirements and wonder why majority are not using this. Maybe might affect performance but for average bikers its Gods sent IMO...

micro-adjustable-seat-posts_spongywonder.jpg


http://www.spongywonder.com/
 
Damn! Noticed the rear tire on my bike was flat yesterday. Called the local bike shop. One week waiting period but they could reduce that to 3 days for me.

Decided to fix the flat myself. 3 hours later, done.

Question: What is the life expectancy of a tube? (I don't bother with the patching stuff, I simply install a new tube.)

Oh for Pete's sake. If you are going to ride, learn to change a freaking flat! Bet the folks at the LBS where laughing at your call.

A tube life would almost be indefinite. The number of patches is the main thing limiting it's life.

Carry at least one tube with you when you ride. I carry two. On tour I carry 3.

Carry a pump, tire irons and a tire boot. A swatch of leather or old jeans makes a great boot. If you slice a tire you will be happy you have it.

Mark your tire at the location of the valve stem. Remove the old tube. Be careful to remember the left and right side of the tube as was on the wheel. This is all going to help you find what caused the flat in the first place. Even though you will be just replacing the tube, you still want to locate the puncture, if possible. One the puncture is located,orient the tube to the tire, matching sides and where the stem was originally located. Go to the location of the puncture and give that section of the tire very careful inspection. Look for any foreign matter, small bit of glass, a thorn etc. The worst is a steel thread from a radial tire. Check both inside and out of your tire. Inspect the rest of the tire in case any foreign matter migrated to another part of the tire.

If you slice your tire, you might get a blow out so you will need to change the tube. Place the boot at the location of the slice between the tire and tube. It will prevent another blow out. Toss the tire when you get home.
 
Damn! Noticed the rear tire on my bike was flat yesterday. Called the local bike shop. One week waiting period but they could reduce that to 3 days for me.

Decided to fix the flat myself. 3 hours later, done.???????


Question: What is the life expectancy of a tube? (I don't bother with the patching stuff, I simply install a new tube.)

I repair my own flats as well, taking it nice and easy even with patching the hole in the tube, the front one can be done in 20 minutes, and the back tire can be repaired in 30 minutes.
 
Oh for Pete's sake. If you are going to ride, learn to change a freaking flat! Bet the folks at the LBS where laughing at your call.

A tube life would almost be indefinite. The number of patches is the main thing limiting it's life.

Carry at least one tube with you when you ride. I carry two. On tour I carry 3.

Carry a pump, tire irons and a tire boot. A swatch of leather or old jeans makes a great boot. If you slice a tire you will be happy you have it.

Mark your tire at the location of the valve stem. Remove the old tube. Be careful to remember the left and right side of the tube as was on the wheel. This is all going to help you find what caused the flat in the first place. Even though you will be just replacing the tube, you still want to locate the puncture, if possible. One the puncture is located,orient the tube to the tire, matching sides and where the stem was originally located. Go to the location of the puncture and give that section of the tire very careful inspection. Look for any foreign matter, small bit of glass, a thorn etc. The worst is a steel thread from a radial tire. Check both inside and out of your tire. Inspect the rest of the tire in case any foreign matter migrated to another part of the tire.

If you slice your tire, you might get a blow out so you will need to change the tube. Place the boot at the location of the slice between the tire and tube. It will prevent another blow out. Toss the tire when you get home.
Running with too low a pressure in your tires can result in a pinch flat if you hit something (pothole, etc). Higher tire pressure also means less rolling resistance so you'll be able to go faster as well.
 
Running with too low a pressure in your tires can result in a pinch flat if you hit something (pothole, etc). Higher tire pressure also means less rolling resistance so you'll be able to go faster as well.

As well as a poorly seated bead. After repairing a flat, I fill the tire up part way, bounce the wheel a bit while rotating it, put little more air, bounce and rotate, let some air out, then fill to capacity.
 
the back tire can be repaired in 30 minutes.
It was really hot outside so I took my time plus several breaks. I actually decided to put in a new tube (hate patches) as it is only $7 and a fairly new tire. I also waited a bit to ensure the new tube would hold air. Cleaned the free wheel, the derailleur and the chain.

My local bike shop only charges $10 plus price of a new tube so I was willing to let them do it but I can't wait 3 days as they are actually fully booked for the whole week.
 
If money is truly not an issue, I would get two good bikes. One for off roading and one just for road riding. This will give you the best experience IMHO.
 
20, 30 minutes to repair a tire? Are you people taking smoke breaks or something?! I had a flat on the way home last week, pulled over under a tree to get out of the hot sun and had it fixed with new tube in about 10 minutes. Even including cleaning up after putting the rear wheel back on it takes 15 minutes at most.

If money is truly not an issue, I would get two good bikes. One for off roading and one just for road riding. This will give you the best experience IMHO.

The number of bikes you want is n+1, where n = the number of bikes you currently own.
 
I repair my own flats as well, taking it nice and easy even with patching the hole in the tube, the front one can be done in 20 minutes, and the back tire can be repaired in 30 minutes.
Why does a rear tire repair take 10min longer then a front tire repair,
Surely someone with your experience doesn't need 10mins to install the rear wheel past the derailleur,
 
Why does a rear tire repair take 10min longer then a front tire repair,
Surely someone with your experience doesn't need 10mins to install the rear wheel past the derailleur,

Drive train. Might take me 2-3 minutes more. Certainly not 10.
 
If money is truly not an issue, I would get two good bikes. One for off roading and one just for road riding. This will give you the best experience IMHO.

The $250 Schwinn I bought 50% off at CDN Tire is just as good as the bike I bought for $1k 16 years ago. If a good road bike come up at half price I might grab it up.


Why does a rear tire repair take 10min longer then a front tire repair,
Surely someone with your experience doesn't need 10mins to install the rear wheel past the derailleur,

I spray the bike with WD-40 and then lube it and wipe it down when I do the flat.

Question: What is the life expectancy of a tube? (I don't bother with the patching stuff, I simply install a new tube.)

A tube can last for years. Patch the tube and keep it around for your next flat. You can test it in a bucket of water to see if there are any air bubbles coming out of the patch.
 
The WD-40 is to clean the dust and dirt off. I wipe off all painted surfaces. To get dust and grease off the chain and sprocket I spray WD-40 on it and let it drip on a newspaper over night. Then I spray with lube. I try not to ride in the wet, but sometimes I get caught in a shower and WD-40 and lube is all you can do to get the water off the sprocket and chain.
 
Patch the tube and keep it around for your next flat. You can test it in a bucket of water to see if there are any air bubbles coming out of the patch.
A patch kit cost $10. A new tube cost $7. The cement in the patch kit is all dried up within a year. I just as soon buy a new tube.