Oh for Pete's sake. If you are going to ride, learn to change a freaking flat! Bet the folks at the LBS where laughing at your call.
A tube life would almost be indefinite. The number of patches is the main thing limiting it's life.
Carry at least one tube with you when you ride. I carry two. On tour I carry 3.
Carry a pump, tire irons and a tire boot. A swatch of leather or old jeans makes a great boot. If you slice a tire you will be happy you have it.
Mark your tire at the location of the valve stem. Remove the old tube. Be careful to remember the left and right side of the tube as was on the wheel. This is all going to help you find what caused the flat in the first place. Even though you will be just replacing the tube, you still want to locate the puncture, if possible. One the puncture is located,orient the tube to the tire, matching sides and where the stem was originally located. Go to the location of the puncture and give that section of the tire very careful inspection. Look for any foreign matter, small bit of glass, a thorn etc. The worst is a steel thread from a radial tire. Check both inside and out of your tire. Inspect the rest of the tire in case any foreign matter migrated to another part of the tire.
If you slice your tire, you might get a blow out so you will need to change the tube. Place the boot at the location of the slice between the tire and tube. It will prevent another blow out. Toss the tire when you get home.