print spooler on dell Vostro Windows 7 keeps stoping

guelph

Active member
May 25, 2002
1,498
0
36
79
Has any one encountered this problem -- I want print and the print window tells me printers are installed

I restart the print spooler and resubmit the print job work fine now for --- for a few minutes the same thing over this happened out of the blue now change in software

Word Excel Tax programs and accounting

Any thoughts would be appreciated.

Thanks
 
I want print and the print window tells me printers are installed

I'll have to assume you really meant it tells you no printers are installed? Helpful if you told us the make/model of the printer and how it is connected? (e.g. network/usb, etc.)

Misbehaving print drivers often crash the print spooler casing this kind of issue. Uninstall the printer completely and then reinstall with the latest drivers from the printer manufacturer. Best advice I can give you without more details.
Windozzze can be down right annoying.
 
I'll have to assume you really meant it tells you no printers are installed? Helpful if you told us the make/model of the printer and how it is connected? (e.g. network/usb, etc.)

Misbehaving print drivers often crash the print spooler casing this kind of issue. Uninstall the printer completely and then reinstall with the latest drivers from the printer manufacturer. Best advice I can give you without more details.
Windozzze can be down right annoying.

the printers are Network printers and HP4250, HP4300 and two cannon. Drivers are updated regularly and I am one of 50 users in the same scenario. Occasionally one or two workstations (all Dell) will start having this problem it seems to go away after while

I found a 14 page document on this issue non web but none of the suggested solutions work. I was wondering if any else had this issue?
 
Although this is unlikely to be the problem, it happened to me about 5 years ago.

The network hard drive that the file spooled to was full or nearly full. So, the print just stopped but without a message like "the job cannot spool because the hard drive is full".

So, check if your temp drive is nearly full. One symptom might be that small files print but big ones don't. And you should leave lots of room for your temp drive anyway.
 
Although this is unlikely to be the problem, it happened to me about 5 years ago.

The network hard drive that the file spooled to was full or nearly full. So, the print just stopped but without a message like "the job cannot spool because the hard drive is full".

So, check if your temp drive is nearly full. One symptom might be that small files print but big ones don't. And you should leave lots of room for your temp drive anyway.

Thank you -- we had that issue and resolved it by freeing up space. In this case I just get the message when I try to print that I have printers installed. I go to services and see that the print spooler has stopped I restart it and the printers all show up and I can print again -- until the next time.
 
I've seen this caused by a bad printer driver. In particular, if a certain program or document type triggers this failure, then it is often caused by the printer driver's inability to process the programs output.

I would suggest deleting all printer drivers back to the 4250 driver (which is fairly old), and then seeing if it happens again. Also, try to uninstall the HP driver, and use the version of the 4250 driver that comes with Windows. Add other printer drivers back, one at a time, in an attempt to figure out which driver is causing your problems.

Also, this can be caused by a conflict between the anti-virus and the printer driver. In particular, some viruses go after the spooler service, because it is always present and always on. A failed virus attack may have left things in a messed up state.

Lastly, an Ethernet network that has many network errors may cause this type of problem. If your office has a managed switch, check for port errors.
 
I've seen this caused by a bad printer driver. In particular, if a certain program or document type triggers this failure, then it is often caused by the printer driver's inability to process the programs output.

I would suggest deleting all printer drivers back to the 4250 driver (which is fairly old), and then seeing if it happens again. Also, try to uninstall the HP driver, and use the version of the 4250 driver that comes with Windows. Add other printer drivers back, one at a time, in an attempt to figure out which driver is causing your problems.

Also, this can be caused by a conflict between the anti-virus and the printer driver. In particular, some viruses go after the spooler service, because it is always present and always on. A failed virus attack may have left things in a messed up state.

Lastly, an Ethernet network that has many network errors may cause this type of problem. If your office has a managed switch, check for port errors.


Thank you this and the other replies has been most helpful