Win 7 stopped recognising my dvd drive

grooverider

Always with my Member
Aug 23, 2001
627
12
18
Always in the Groove...
I fired up a program that was to access my dvd drive, but it shot up a warning saying that it couldn't read the dvd drive. I checked my system and it is not reading my dvd drive. This worked last night and I didn't do anything different than normal (I know how it sounds... "Of course I didn't try to jam a ham sandwich in there!").

Also, I cant even open the drive.

Under the device driver I'm not seeing the drive under the "Disk drives" area.

Any ideas? I don't want to have to reformat my system if I don't have to.

Always in the Groove...
 
remove it from the device manager and reboot the PC
it will install it upon reboot
 
It didn't appear in device driver. When I booted today it appeared. All I ask for is a solid OS (apple whores shut up! :p)

Thanks

Always in the Groove...
 
try this ..... http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

another possible issue ....

ACER TSST TS-L633B
I had the same problem with an ACER TSST TS-L633B DVD+/-RW [SAMSUNG] which took me months to find the answer.

PROBLEMS
- Drive disappears in Windows Explorer;
- Drive reappears when tray opens or closes;
- Have to reboot computer to see drive.

CAUSE
This problem occurs because the SATA driver (Msahci.sys) implements new power management functionality that is known as Adaptive Link Power Management (ALPM). ALPM is a feature that puts a hardware device into sleep state after 100 ms of idle time. This is a power-saving feature. Some optical drives do not behave correctly with ALPM enabled, and therefore these drives may not be recognised by the computer. The following is a list of some DVD drive models that are known to exhibit this problem:

TSST TS-L633B DVD+/-RW [SAMSUNG]
SONY BC-5100S DVD
SONY BC-5600S DVD
PLDS DS-8A3S [DELL]


FIXES
METHOD 1. Update the DVD firmware;
METHOD 2. Manually turn off ALPM.

or this will work


Try this, I hope this helps
1. Click on Start --> Run --> and type in 'regedit' followed by the enter key ( if Vista Start search or windows+R )
2. Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or
3. clicking the "+" next to it.)
4. Expand the "SYSTEM" Key
5. Expand the "CurrentControlSet" Key
6. Expand the "Control" Key
7. Expand the "Class" Key
8. Please look for a key containing the following string of letter and numbers:
{4D36E965-E325-11CE-BFC1-08002BE10318}
9. High light this key by left clicking once on it
10. On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
11. Please exit the registry by clicking on the "X" in the top right hand corner of the screen

Reboot your computer

.Reply to Dirty Durden
 
Could even be as simple as a new SATA (or IDE) cable or something along those lines.
I'm trying to work over a friends computer and what a pain in the ass it is to figure out why the power is flickering but not turning the computer on.

So I'd check the cable(s), or just grab a cheapy Samsung drive for $20, I did, love it and it's damn fast.

Good luck GR.
 
Had a similar problem when I found out my cd drive was fried. I was on a vista system. It was the exact same problems and I followed the usual software fixes with no luck, of course as my drive fubar'd...