I have had numerous requests for help in this matter. Rather than answering each person individually i thought it will save time to post the instructions here.
I will presume that you have a router, an antivirus and have broadband. If not broadband then naturally your d/l and u/l speed is going to vary.
First of all, disable the antivirus firewall. Don't really need it. But if you are a worrier then turn it on when you finish d/ling.
If you do the above then you don't have to port forward individual p2p programs running on the computer.
More help available at http://portforward.com/
Next step: is the router. For this port forwarding is compulsory as you cannot turn off the router and use the Internet.
Extensive help and tutorial available at http://portforward.com/
Before you start configuring the router, you will need the ip address for your computer.
Go to start, click on Run, type in ipconfig. This will open a DOS window. Your ip address will be, wait for it, in the ip address line. Usually, 192.168.1.xxx.
Please note down this ip address, you will need it later.
In case you cannot open the dos window by typing ipconfig, go to start, all programs, accessories, you will see command prompt there. Just click on that and type in ip config at the cursor.
Enter http://69.196.1.19./ in the address bar. This will open up a window stating the router model and 2 blank spaces for username and password.
Leave the username blank. In the PW type in admin.
This pw will work for most routers. If not for yours then you will have to refer to the router manual or contact tech. support. Additional guidance is again available at http://portforward.com/ and numerous Torrent oriented forums on the Internet. Just google it.
Once you get into the router setup, do not go crazy and start changing everything.
All you will have to do is, in case of a Linksys router, go to Application & Gaming, click on port forwarding (not triggering).
In the first window (application) enter a name, it does not have to be anything specific, e.g. Torrent.
In the start and end window, type in 1720. Protocol will be both. For ip address enter the address you got from the dos window earlier on. Click on both.
If you have mutiple computers just enter the different addresses for each and click on save settings at the bottom of the page. Keep the same port number though. That's it, the ports have been forwarded.
You will have to change the listen port in the p2p client. Tools, preferences and change port to 1720.
You can fiddle around with the other settings also.
Go to http://portforward.com/cports.htm
all applications are listed there. But remember to use port 1720 for Rogers.
I hope this helps. PM me if you need any further assistance.
If anyone has any further comments or configuring tips, please feel free to add on.
P.S. please excuse any spelling or other mistakes.
Mods. if you would like to move this to the tech. section please do so.
I will presume that you have a router, an antivirus and have broadband. If not broadband then naturally your d/l and u/l speed is going to vary.
First of all, disable the antivirus firewall. Don't really need it. But if you are a worrier then turn it on when you finish d/ling.
If you do the above then you don't have to port forward individual p2p programs running on the computer.
More help available at http://portforward.com/
Next step: is the router. For this port forwarding is compulsory as you cannot turn off the router and use the Internet.
Extensive help and tutorial available at http://portforward.com/
Before you start configuring the router, you will need the ip address for your computer.
Go to start, click on Run, type in ipconfig. This will open a DOS window. Your ip address will be, wait for it, in the ip address line. Usually, 192.168.1.xxx.
Please note down this ip address, you will need it later.
In case you cannot open the dos window by typing ipconfig, go to start, all programs, accessories, you will see command prompt there. Just click on that and type in ip config at the cursor.
Enter http://69.196.1.19./ in the address bar. This will open up a window stating the router model and 2 blank spaces for username and password.
Leave the username blank. In the PW type in admin.
This pw will work for most routers. If not for yours then you will have to refer to the router manual or contact tech. support. Additional guidance is again available at http://portforward.com/ and numerous Torrent oriented forums on the Internet. Just google it.
Once you get into the router setup, do not go crazy and start changing everything.
All you will have to do is, in case of a Linksys router, go to Application & Gaming, click on port forwarding (not triggering).
In the first window (application) enter a name, it does not have to be anything specific, e.g. Torrent.
In the start and end window, type in 1720. Protocol will be both. For ip address enter the address you got from the dos window earlier on. Click on both.
If you have mutiple computers just enter the different addresses for each and click on save settings at the bottom of the page. Keep the same port number though. That's it, the ports have been forwarded.
You will have to change the listen port in the p2p client. Tools, preferences and change port to 1720.
You can fiddle around with the other settings also.
Go to http://portforward.com/cports.htm
all applications are listed there. But remember to use port 1720 for Rogers.
I hope this helps. PM me if you need any further assistance.
If anyone has any further comments or configuring tips, please feel free to add on.
P.S. please excuse any spelling or other mistakes.
Mods. if you would like to move this to the tech. section please do so.

