Shower Head Question

Keebler Elf

The Original Elf
Aug 31, 2001
14,845
507
113
The Keebler Factory
I have a shower head like the one below. Not sure if the one I have is low flow or not but I'm thinking it is because I find the water pressure from the shower head (when not being used in hand held mode) to be weak compared to a normal shower head that doesn't have a hand held attachment.

Does anyone else have a shower head like this that has strong water flow? I want to figure out if all of these types of shower heads have weak flow (maybe because of the hose attachment?) or if it's just the model I have.

I like having the handheld attachment but not at the expense of water pressure when using in normal shower mode.

http://www.canadiantire.ca/AST/brow...ting%2BHandheld%2BShower%2BHead.jsp?locale=en

For example, would this be an upgrade with stronger flow? http://www.pfisterfaucets.com/bath/Product/016-400C.aspx#tab:2
 
any shower head sold today will be water saver. there may be an insert you can pull out from inside the hand unit.I had that with Moen taps when I lived in the country( cistern with apump) and the water flow was less than I could piss. there was a grommet inside that I remoived and increased the flow
 
any shower head sold today will be water saver.

I just hate that! If I want to save water, I'll just water the lawn every 4th day instead of twice every day like my neighbours. That is why I'm keeping my 15 year old showerhead and not replacing it with the free "water saver" that the City gave me.
 
dammit, I thought this was gonna be about bj's in the shower :(

You should be able to remove the flow restrictor but it won't be as good as a bj.
 
Where can I buy a shower head without the water saver thing? I also feel a lack of pressure and would like more.
 
Not sure if upgrade will be better. i have one like the first shower head (same brand) and pressure is good on it.
 
The design concept of the low-flow is to reduce the volume used by spraying a smaller amount finer and wider—more like a mister than a watering can—and to replace the feel of pressure due to volume with pressure due to velocity, using nozzle design. An engineer could tell you if that's a venturi or a bernoulli thing or both. But to make any of that work, you need a certain minimum pressure of water behind the head.

That's a fair whack of variables to consider, and retailers make A-B comparison almost impossible, although Taps on Lawrence has a big side by side display. Before you go shopping anywhere, I suggest you assess the pressure your system delivers to the head. It's just possible your real search could be for a head that somehow compensates for low pressure and flow, as best that can be done. But if it's coming out like a firehose, then you know its the between-head differences that are your issue, and you can make satisfaction a purchase condition, or try to.

To the chase: My own version of the hunt has been to carefully observe showers wherever I visited, and somtimes to make temporary swaps with friends to test. With poorish neighbourhood pressure but all new copper from the main, I found an oversize rain-style head the most comfy.

Now, if only it suited all who use it.

TEST:The only way I know for amateurs to test flow in a shower is to take the head off, attach a non-restricting tube or hose if needed to direct the flow and measure volume delivered over time, e.g. How long to fill a gallon can (you'll be more accurate with a fiver) converted into gallons per minute. Not that you'll have much luck at the store finding anyone who thinks that way, metric or imperial, but it's a start. And you will have your subjective observation of flow from the pipe to describe to them.
 
Last edited:
I had the really nice people from ythe City of Mississauga show up at my door with two free shower heads. I took one look at the supply side end and knew there was no way any decent ammount of water could get through that tiny hole. A couple of minutes with the Makita and a drill bit, it was was time for a test run. The regular shower setting shoots water out with great pressure, the "massage" setting actually massages, and, when set to "mist" ... it hardly uses any water. The best of both worlds! Never be afraid to McGuyver.