Rust Check?

Keebler Elf

The Original Elf
Aug 31, 2001
14,845
507
113
The Keebler Factory
A friend of mine has an older car that is now showing rust at the bottom of her car doors. She wants to keep the car a couple more years.

Does the spray can of Rust Check that you can buy at Canadian Tire do anything? I see there are two versions: Rust Check (which looks like a thinner clear coat type spray) and Rust Check Coat & Protect (which appears to be a thicker consistency that resists washing off better).

Obviously with the rust already present there's no turning back but does this stuff do anything to slow down the spread of rust?

She parks underground so her car is particularly vulnerable to rusting. She's not looking to spend hundreds of dollars cleaning off the rust, priming, painting, etc. as her car just isn't worth it.
 
Keebler this question has multiple answers. I have few older cars and last year after doing some research
I went with Crown Rust Proofing. This is a chain business. I went to Lakeshore location in Sauga.

Well, the guy told me whatever rust I have on car, she'll stay the same. Won't go more. He was wrong. I had little bit of rust and that spot has increased.

I would still go again this year. Maybe it may have gone even worst.

What kind of car / model / year is it ? That might help in deciding if it is worth working on.

E.g, if it is a 1957 Chevy :-) I would keep it.
 
Take a look at rusty cars on the street, you will see that they rust at the bottom of the door and at the wheel wells. Get a $10 can of Rust Check and spray it into the holes under the door. Point the sprayer towards the outside of the car. spray up and to the left and right of the hole. You can access the inside of the fender on some cars from the engine compartment. If you go to Rust Check or other places that do rust proofing, they do pretty much the same thing. They even give you much more than you need to keep you happy because the product is so cheap. You are paying for overhead and profit when they do it. Even if the car is rusted now, the product will still slow the rusting. Ten minutes, $10. Thats all it takes.
 
Thanks guys. That helps. She probably won't do anything more costly than using some cans of Rust Check but as long as it's not a total and complete waste of money I'll recommend she do it.
 
Rust Check helps slow rust for sure. Should clean the bottom of the doors on the inside and spray some water through the drain holes to clear the sludge out. Can do this at the coin wash. After a few days when the water is dried out, spray the rust check in the drain holes so it coats the lower area on the inside of the doors. Use the thinner Rust Check spray as it will seep into cracks and spread out.

Be aware of where she parks as the oil will drip out for a few days
 
Rust Check won't do shit, other than smell like shit.

Corrosion is simply a flow of electrons from Anode to Cathode and no liquid goo is going to stop that. If you want to stop corrosion in a metal, you need to cathodically protect it. End of story. A cathodic protection system works by introducing an electrical currrent into metal to prevent the flow of electrons. In Layman's terms, it pushes back. And there are all kinds of voo doo cathodic protection systems out there and whether they work or not is subject for a Phd Thesis or a thousand in Materials Engineering. Rust check is not a cathodic protection system and therefore it will not slow or prevent corrosion.

Often times, you will see sacrificial anodes of zinc attached to sea going ships and the like, or tanks. This is a primative form of cathodic protection. The theory is that the zinc will sacrifice itself to preven corrosion of the iron.
 
Last year my car was brand new, when I switched to winter tires I did not put the hub caps on. I sprayed the center hub with Rustcheck. With all the salt and water spray directly on the hubs they still have no rust even after 2 winters. The $10 investment is well worth it. Use half a can now in the spring and spray the other half in the fall. You will have less dripping than if you sprayed it all in one application.

BTW- There is no smell.
 
Often times, you will see sacrificial anodes of zinc attached to sea going ships and the like, or tanks. This is a primative form of cathodic protection. The theory is that the zinc will sacrifice itself to preven corrosion of the iron.


What you describe, zink anodes, is by no means primitive cathodic protection.
 
What every one here is saying is true. Each method will give varying degrees of protection from corrosion. If you want to learn more about corrosion and corrosion protection, start with a good classic book such as 'Corrosion Engineering' by Mars Fontana (McGraw-Hill, 1986, Third Edition, ISBN: 0-07-021463-8).

One thing that I would avoid with a vengence is the so-called after-market tar protection schemes that were popular back in the 80s and 90s. These applications would actually accelerate corrosion by means of pinhole corrosion, crevice corrosion, lack of proper darinage, and other induced corrosion scenarios.

The oily systems from Crown and Rust Check are far better than these old methods. Another treatment that I would avoid from personal experience would be Corrosion Free that was applied to my car by Crappy Tire. One of my cars rusted catastrophically after one year of its application.

And, if you are going to try cathodic protection, make sure it is done by some one who really knows what they are doing and not rip you off for just simply installing a few wires and a battery to your vehicle. You have to know hwo to distribute the applied potential around a complicated metallic body such as an automobile for applied cathodic potentials to be useful for corrosion protection.
 
Ever heard of a dielectric liquid?

Ever hear of fluid thin film insulators that interfere with galvanic electrical currents?

What about displacing the conductive electrolyte (salty road water) with a non-conductive insulating liquid?

What about barrier coatings. They have this new stuff out called PAINT!

LOL!


Like me, you know enough to be made a fool of from time to time by someone who knows more on a subject you only knw enough about to sound smart to someone that isn't!

I've forgotten more about corrosion prevention than you'll ever know.
 
Get an electronic rust inhibitor and have it properly installes. It won't stop the rust, but it will sure slow it down to a crawl. It's at least a couple of hundred dollars for a decent one, but you don't have to let it go with the vehicle, you can move it to the next vehicle for the cost of the install as they are not vehicle specific, nor do they wear out..

http://www.canadiantire.ca/AST/brow...ic%2BRust%2BProtection%2BSystem.jsp?locale=en

on sale right now for $199.99 ( $100.00 off )

I've had one on my car for eight years, I've had a "down to the metal" stone chip that hasn't rusted in six years..
 
Nature always wins. Anything that seals water and air away from the steel—galvanizing, paint, oils—will slow down the natural process of iron bonding with oxygen and showing as rust. But nothing will stop it, not for long.

In her case, the effectiveness of RustCheck's proprietary sealers depends more on how carefully and thoroughly she applies them than on how effective they are as sealants. And when she dumps the car, how will anyone know whether those sealants bought her an extra year with the car or not? But for a few bucks and a bit of effort, they'll make her feel better.
 
Last edited:
POR 15 is a great product. It will make a cheap repair if cost is the main concern. I would think of it mainly to be used on the underside of a car where you may have picked up some surface rust on frame members. The solvent fumes are really terrible and it should be used with a lot of ventilation, but it is a good product for the right use.

Replacement doors from a scrap yard are usually available, perhaps from a warmer climate. There is a vast supply of used car parts available from the internet. Post what you need and see if anyone has some clean rust free doors.