Stymie said:
save money
or save your life/family/friends
Retreads are a proven technology for large trucks and very safe. They are no more likely to fail than new tires. If properly retreaded, tread separation is rare and the probablility of belt separation is very low. Tires are pretty much still hand made. A carcass that has gone 200,000 miles without belt separation has "proven" that it was manufactured correctly and will likely go another 200,000. The transport tires you see on the highway are almost always blow outs. Tires blow out due to excessive heat from too much sidewall flex caused by low air pressure or overloading, not build quality.
As for cars, I would tend to steer away from retreads for several reasons, not necessarily because they are retreaded, but because of other factors that the big trucks usually don't worry about.
1. The alignment on big trucks does not go out as easily as cars because of the tall height of the sidewall that can absorb the impact, the sturdiness of the steering components and the fact that they are usually driven by professionals. Car alignments easily go out in comparison. Since the belts in the tire settle, your car could develop a pull in one direction or the other if the alignment was out on the car the retreads came from. Sometimes tires pull to one side just because the tire has always been mounted on one side of the car and is put on the other side.
2. The compound and tread design of the retread is most likely different than the original, so they would not perform the same as the name stamped on the tire. It matters to me because I buy performance tires, but if all you want is something black and round, I guess it's not a big deal.
I would personally try and buy used tires with greater than 8/32's of tread made by a brand name company that I could research on
www.tirerack.com to see how it performs.