New Smart Hydro Meters

C Dick said:
I would not mind a smart meter that charges more during peak times, it is the smarter meter that turns off your AC and other appliances when it feels like it that disturbs me.


Oh and you know that is coming. That people just suck it up is beyond me.

It is the rotten food in the refrigerator that gets turned off by the smart meter that will start getting people angry, or the gas furnace that won't switch on because the electricity is off.

EU
 
Keebler Elf said:
So let's do nothing? :rolleyes:

It's not all that hard at all to do your laundry in off-peak hours. Really, you're trying to tell us you can't do your laundry after 8 pm or on weekends? C'mon...
what if you work nights?
 
red said:
what if you work nights?

I guess if your shift is from 8p to 8am you are out of luck for during your work week, but you'd still have the off-work days to do the laundry (and you're already used to being up all night :) )
 
Moraff said:
I guess if your shift is from 8p to 8am you are out of luck for during your work week, but you'd still have the off-work days to do the laundry (and you're already used to being up all night :) )

sure if you don't work weekends which alot of shift people do.
 
Well, it is off peak hours from 10 pm to 8 am, then the second lowest time is 8 am - noon...highest peak is noon to 5....and 5 pm - 10 is back to the second lowest (oddly enough).

It kind of makes sense tho when you think that industry consumes infinitely more hydro than a thousand houses. (think of what it takes to change boxite into aluminum....astronomical)
 
tboy said:
because cfl's produce more heat (I guess due to the built in ballast?) I have heard that they don't last more than a few days in recessed ceiling recepticles or anywhere else they don't have adequate ventilation. Can anyone confirm this?

I have CFL's in every fixture that I have. CFL's produce much less heat than Incadescent light bulbs. They don't fit in some fixtures, particularly ones requiring flood lights. If you suspect that they won't work with your recessed light fixtures, I would look for mechanical problems first.

Examine the application, fixture and wiring before blaming the bulb. For instance, many recessed lights are on dimmer circuits. Make sure you are not running a CFL on a circuit with a dimmer! Additionally, some light fixtures are only intended for very specific applications with specific light bulbs.

There are a number of high-power LED products that will be excellent for recessed lighting. They are just starting to become available for consumers. In the future, LED lighting will be ideal for recessed applications.
 
Yea..I got my "smart" meter as well.
While I hate thinking that I'm being subsidized by the government, when paying less than the going rate, I guess we have been.
However, Sir Adam Beck, the Grandfather of Upper Canada's electrical system, was convinced that Ontario could become a world player if every citizen and business had access to cheap, plentiful power.
It's funny that 20-25 years ago, Ontario citizens were encouraged to use more and more power ( move from gas cooking, oil furnaces) and the more power you used, the bigger the discount you got,
How times change.
 
I also read recently that since OPG has been deregulated/regulated/deregulated by McSquinty Ontario Hydro had a massive debt that needs to be recouped by all us suckers.....

Speaking of suckers, I read in the sun recently that this may well turn out to be worse than the gun registry which cost us billions of dollars and amounted to nothing but bullshit.

For eg:
1) So we're replacing perfectly good meters with smart meters. What are they doing with the old ones? Throwing them into a landfill?
2) So, now we know that it costs us more to use electricity between noon and 5 pm....so, who is home at noon to 5 pm? and is everyone going to stop cooking dinner at 5 and wait until 10? NO.
3) So, we each have to pay $500.00 for the meters (wait until you get your bill)....so I could have paid someone for 4 yrs to manually read my meter for the same price......and will I be able to SAVE $500.00 worth of electricty in my lifetime? NOT likely.....
4) Distribution costs: so, for 1/3 the price of all the electricity I use, they are charging me for the wires/transformers etc. So, I should expect them to replace all the lines leading to and from and on my street? I bet I'll not see that happen in my lifetime because I know some people who have lived here for 40 yrs and they havent' yet....so where's the money going?
 
Fire hazard..

tboy said:
As rubmeister so rightly pointed out once before about items such as incandescent lightbulbs etc, everything has an energry cost associated with making the item. For eg: it takes x amount of energy to make the bulbs you have in your house now. If you replace those bulbs before they burn out, you're effectively wasting the evergy it took to make those bulbs.

So, if you're going for the cfl bulbs, only replace burned out bulbs not ones that are going strong.

Another thing: because cfl's produce more heat (I guess due to the built in ballast?) I have heard that they don't last more than a few days in recessed ceiling recepticles or anywhere else they don't have adequate ventilation. Can anyone confirm this?
********************************
I heard on the radio a while back that you cannot put the new bulbs in an enclosed fixture. ie bedroom ceiling light fixture. They overheat.
 
The debt....

tboy said:
I also read recently that since OPG has been deregulated/regulated/deregulated by McSquinty Ontario Hydro had a massive debt that needs to be recouped by all us suckers.....

Speaking of suckers, I read in the sun recently that this may well turn out to be worse than the gun registry which cost us billions of dollars and amounted to nothing but bullshit.

For eg:
1) So we're replacing perfectly good meters with smart meters. What are they doing with the old ones? Throwing them into a landfill?
2) So, now we know that it costs us more to use electricity between noon and 5 pm....so, who is home at noon to 5 pm? and is everyone going to stop cooking dinner at 5 and wait until 10? NO.
3) So, we each have to pay $500.00 for the meters (wait until you get your bill)....so I could have paid someone for 4 yrs to manually read my meter for the same price......and will I be able to SAVE $500.00 worth of electricty in my lifetime? NOT likely.....
4) Distribution costs: so, for 1/3 the price of all the electricity I use, they are charging me for the wires/transformers etc. So, I should expect them to replace all the lines leading to and from and on my street? I bet I'll not see that happen in my lifetime because I know some people who have lived here for 40 yrs and they havent' yet....so where's the money going?
********************************
started to accumulate back in the 70's. I worked for a company that supplied Tiverton while it was under construction and visited their downtown accounting department here in Toronto. It was then that I learned we were getting artificially low rates and clocking up debt.

It went on for years.
 
tboy said:
I also read recently that since OPG has been deregulated/regulated/deregulated by McSquinty Ontario Hydro had a massive debt that needs to be recouped by all us suckers.....

Yet another case of trying to blame all the world's woes on McGuinty. :rolleyes:

Despite the fact gov't subsidies have been in place LONG before he arrived. In fact, the Libs have done very little in the energy sector.

Unlike MIKE HARRIS, who fucked the industry royally with his waffling and mishandling of the Ontario Hydro breakup debacle. He's far more to blame for our current woes than McGuinty.
 
Thats what I thought but...

I am using the same HWR as before .Not looking at the cost just usage .I found 2 things wrong with the new light bulbs ,Using an amp meter they create spike when the first turn on like an electric motor, and if the ballast gets really hot they use allot more then they are rated for. In short they suck monkey balls I can to wait until they make an LED version

james t kirk said:
CFL's use 15 watts I believe. Compared to say a 60 watt bulb, however, your actual dollar savings will be next to nothing unless your house is lit up like a fire cracker.

If you have 6 bulbs burning on average in your house, you'd save 260 watts.

In a 4 hour evening, you'd save 1 kw.hr

I believe a kw.hr is about 4.6 cents in Ontario.

Therefore, over the course of a month, you'd save about $1.20

I personally don't use CFLs, nor will I in the future because I don't like, nay, I detest flourescent light. It gives me stress headaches, reminds me of the office (or chinese restaurants) and I don't like looking green.

Besides, any energy saved will simply be put into the grid and the Americans will buy it up. I don't see them EVER scaling back electrical production in Ontario, sorry.
 
toughb said:
********************************
I heard on the radio a while back that you cannot put the new bulbs in an enclosed fixture. ie bedroom ceiling light fixture. They overheat.


The heat cannot escape from inside the fixture & the electronics in most CFL's are not designed to survive in those temperatures.

The CFL's will work in an enclosed fixture, however they will have a shorter life, I believe it's life would be shortened by approx 40%, which means that a lamp that is rated for 10000 hours should work for 6000, which is more than 6 times as long as a normal incandescent lamp... and still 1000 hours longer than a halogen lamp

There are CFL's (Panasonic) which are designed to work in enclosed fixtures & outside in cold temperatures. These cost more.

Also, it is a myth about CFL's causing headaches. In the past, T12 tubes did flicker as the ballast / lamp aged and caused headaches, but newer T8 & CF lamps operate at a much higher frequency, making it virtually impossible for the human eye to notice any flicker.

The only downfall to most CFL's is that they are not dimmable

Only an IDIOT would say that CFL's do not save money & free up power. It is proven technology. Why do you think that many businesses (especially hotels) have used them for YEARS???

tboy said:
1) So we're replacing perfectly good meters with smart meters. What are they doing with the old ones? Throwing them into a landfill?

4) Distribution costs: so, for 1/3 the price of all the electricity I use, they are charging me for the wires/transformers etc. So, I should expect them to replace all the lines leading to and from and on my street? I bet I'll not see that happen in my lifetime because I know some people who have lived here for 40 yrs and they havent' yet....so where's the money going?

I am sure that the old meters will be sold cheap to companies that will refurbish and resell them as they can still be used as info / check meters.

There is maintenance that must be done on the lines & equipment (low & high voltage transformer & switches) do not last forever.
 
Keebler Elf said:
Yet another case of trying to blame all the world's woes on McGuinty. :rolleyes:

Despite the fact gov't subsidies have been in place LONG before he arrived. In fact, the Libs have done very little in the energy sector.

Unlike MIKE HARRIS, who fucked the industry royally with his waffling and mishandling of the Ontario Hydro breakup debacle. He's far more to blame for our current woes than McGuinty.

Wait, did McSquinty not deregulate ontario hydro thereby resulting in the mess I'm in right now?

WIth the deregulation didn't the subsidies cease? Well, they were in place before and they're not now so what does that mean?

I mean, if the shit fits, McSquinty should wipe his ass......
 
Keebler Elf said:
Yet another case of trying to blame all the world's woes on McGuinty. :rolleyes:

Despite the fact gov't subsidies have been in place LONG before he arrived. In fact, the Libs have done very little in the energy sector.

Unlike MIKE HARRIS, who fucked the industry royally with his waffling and mishandling of the Ontario Hydro breakup debacle. He's far more to blame for our current woes than McGuinty.

And who do we blame for the fact that the debt hasn't been reduced by much - if at all - during the years that we've been paying a "debt retirement charge"?
 
Gas stoves for cooking, gas dryers for drying, on demand hot water heaters instead of keeping millions of tanks of water hot when no one needs them...and last but not least...throw out the forced air furnaces in favour of more efficient boiler systems.
As far as A/C goes, we should design our homes and buildings to ventilate, use shutters, awnings and reflective roofing surfaces to reduce solar gain, Air conditioning sucks.
 
muscle lover said:
Gas stoves for cooking, gas dryers for drying, on demand hot water heaters instead of keeping millions of tanks of water hot when no one needs them...and last but not least...throw out the forced air furnaces in favour of more efficient boiler systems.
As far as A/C goes, we should design our homes and buildings to ventilate, use shutters, awnings and reflective roofing surfaces to reduce solar gain, Air conditioning sucks.

Well actually, boiler heating systems being better than forced air is debatable.

Each have their pluses and minus'.
 
It is funny with most energy saving measures. They all cost money, up front & payback over time. The majority of people do not want to pay that money up front.
 
Papi Chulo said:
It is funny with most energy saving measures. They all cost money, up front & payback over time. The majority of people do not want to pay that money up front.

Are you referring to boiler heating or smart meters?

Because if you're referring to smart meters they do not actually save energy in the least. In fact, if you take a close look at the infrastructure that is required to maintain the system you would probably find in the big picture they actually use more energy (computers monitoring the actual meters, the offices to house the monitoring system, transportation of the people to and from those offices, billing computers, fuel costs to deliver the meters etc).

It is like putting a flow meter on the fuel line in your car. It can tell you when you're using fuel, but if you are already taking steps to maximize your fuel economy (light on the gas peddle, releasing the gas while going down hill, allowing speed to drop off going up hill) the meter doesn't actually DO anything....

Same as smart meters: if you're already doing your laundry on off peak hours, don't use the oven, use the microwave instead, only do a full load of dishes or laundry, hang up to air dry what you can, you have already maximized your efficiency......