GETTING THE BEST OUT OF YOUR DISHWASHER
Just last weekend I was at a family event and was helping clean up afterwards. The host said her dishwasher didn't do a good job so just put the rest of the stuff in the sink. I saw the way it was loaded etc and wrote this for her to consider in the future. I have heard complaints about ineffective dishwasher performance from many people over the years and have given them the following advice. I really works.
Thought I'd share it with the TERB Domestic Gods!
1. Have a look at the direction your dishwasher arms spray water and then organize your dishes so they get sprayed, not shadowed from the next dish.
2. Use the vertical cutlery baskets and their dividers to keep individual utensils apart from each other, not nesting. Load spoons, forks and blunt knives randomly (ie: not spoons together as they can, well, spoon!) facing upwards so they get sprayed directly. Put steak and paring knives together, in the back, facing up if you are also the one unloading. If someone else is unloading, maybe points down so as to reduce the risk of accidental injury. (I don't wash my good knives int he DW as the detergent can actually erode the metal from the fine edge.)
Arranging your dishes correctly is REALLY important and will improve the quality of your wash substantially.
3. Put an ounce of liquid or a tablespoon of powder dishwashing product into the bottom of the dishwasher before closing the door to help pre-clean your dirty dishes during the first pre-rinse/wash. Any cheap Liquid/Powder DW detergent is fine.
4. I use Finish brand Dishwasher tablets in the dispenser. Last time I checked,. Consumer Reports showed they were the most effective.
5. Before starting the dishwasher cycle, run your HOT water tap until the water is hot. Otherwise the pre-rinse/pre-wash cycle will fill with cold/warmish water. Hot water drastically improves the cleaning effectiveness, especially against oil-based and protein residue like eggs.
The pre-rinse detergent and pre-heated initial hot water fill really make a difference.
6. I select "High Temperature" wash for the main cycle for optimal cleaning during the main wash.
7. I select "NO HEAT" for the drying cycle to both save energy and in case there are any plastic things that the heat could melt.
8. Always make sure your Rinse Aid reservoir is not empty.
9. If you live in an area with hard, or somewhat mineralized water, put a tallish 12 ounce glass with 6 ounces of "Cleaning Vinegar" in it on the top rack near a corner once in a while. The acid will be diluted by random splashing during the cycles and help to reduce/remove mineral deposits on your glassware.
10. Look online or YouTube to learn how to remove and clean the filter screen(s) in the bottom once a month or two. These get slimy and can also get clogged up. Sometimes bits of broken glass or cherry pits etc can get jammed in there and reduce your water flow.
11. If you live alone or don't use a lot of dishes, load them in the DW anyways and just use the "RINSE HOLD" function to give them a rinse until you get a full load. Use a teaspoon of the powder/liquid detergent for this pre-rinse.
Hope this helps!