Laptop won't turn on???

Larry_Fyne said:
Of course HP or IBM or SOny tech support answers the phone right away and they solve your problem before you finish telling them what it is? I get sick of hearing people bash Dell support or Dell sales. It's sort of like when people slag Air Canada. Those people have not been at Chicago O'Hare trying to convince some daft woman from United that they should pay for the hotel because of the flight they made you miss.

I have 4 Dell's in service now and 1 before. I have clients that have made Dell their standard. Guess what, the other guys are no better. I have sat on the line with both HP and IBM support for their crappy equipment too.

I don't disagree with you there, but Compaq doesn't have long wait times and sends a technician within 2hrs.
I still have to wait for Dell to send me the spare parts which takes 4 to 6hrs.
 
Well, my experience with Dell customer service was pretty good. I was on hold for less than 5 minutes, the technician did as much as she could considering she didn't have the laptop in front of her, she documented the call, and she even updated the parts technician before transferring me so I didn't have to repeat the whole story. She also provided advice beyond that given by the Dell manual.

I haven't called Dell very much, but they've always been helpful and I don't recall waiting for obscenely long periods of time. But then, I usually surf the net while I'm waiting so it's not that big a deal.
 
Keebler Elf said:
Thanks for that useful and practical bit of info. :rolleyes:
I know I may sound ficious but seriously .. Pm me if you want to know more.
 
Keebler Elf said:
Well, my experience with Dell customer service was pretty good. I was on hold for less than 5 minutes, the technician did as much as she could considering she didn't have the laptop in front of her, she documented the call, and she even updated the parts technician before transferring me so I didn't have to repeat the whole story. She also provided advice beyond that given by the Dell manual.

I haven't called Dell very much, but they've always been helpful and I don't recall waiting for obscenely long periods of time. But then, I usually surf the net while I'm waiting so it's not that big a deal.
I have a DELL Dimension 4700 and its been pretty reliable so far.
Also their tech support is good, so I dont know what NV is talking about ??
 
Escohort said:
I have a DELL Dimension 4700 and its been pretty reliable so far.
Also their tech support is good, so I dont know what NV is talking about ??

A few year back, maybe two years ago, DELL wanted to cut down call centre cost even more. It transfered the call centre to somewhere in India. The service was even worse. They had to contract the work back to our local company.
 
Well which is it? If they're going to have telephone technicians who do nothing more than read off manuals then why not outsource to India?

To some degree I can sympathize with Dell's situation; why are they going to pay top dollar to have accredited computer technicians sitting on the phone teaching people where the ON/OFF switch is on their computer? And what accredited computer technician in his right mind is going to want to answer telephones all day? It doesn't make sense...
 
When I called DELL tech support I got an east-indian guy on the line but he solved all my PC problems.
So I dont see a good argument against outsourcing as long as they're qualified
 
I have a Dell D600

2 weeks ago the battery went from lasting 3 hrs to not working. One night it was fine the next day bam nothing. I am pissed, but you get what you pay for.
 
Guys, for Farks sake. Buy a volt meter, a crappy one from Radio Shack, will fill the bill.($11)
Measure the Battery leads, with the battery out. 12, 11, 10,13.5V? OK
Measure the IMPEDANCE of the corresponding electrodes, in the notebook.
Should be , my guess, is above 50kohm. If not, like really low, 100ohm, short in one of the moduals. Un plug components, untill Impedance rises.
If all this seems ok, Power supply could be loading down Battery.
Measure Voltage (DC) at PS output, Should be approx 12.5-13.5 VDC.
Plug in to Battery? Voltage drops?Change PS.

Failures like this are typically Power supply related.
Jeez You gus Know DOS, MAC, PC, and all that shit, but not basic Ohms law and Trouble shooting.
What in the hell is the world comming too?
 
Approximations Ben, The PS will indicate the DC output.
Typical Pb-acid battery, charges to 13.6 V, with nNO drain.
As you know, Internal Resistance, Yada, yada, Yada.
If output is supposed to be 20V and we measure 20-35% less, usually a supply problem, but if we measure LOW , less than 8 V, Typically a Short in the Load.
Look at Magintudes, not details when first troubleshooting.
THEN after narrowing it down look at Details.
Diode
 
I have a sneaky suspicion the power supply isn't the problem on mine. Afterall, even if the power supply was faulty, the remaining charge in the battery should have been enough to power it up; it wasn't like I had drained the battery down to nothing.