How to become a car expert?

stinkynuts

Super
Jan 4, 2005
8,939
3,220
113
Would like to learn about cars so that I can diagnose the problems, fix them, or even just change my own oil. I'm tired of getting my oil changed and forking over hundreds of dollars each time because some sleezy technician thinks he can take advantage of my ignorance. What is the best way? I'm willing to take some courses.
 
There are all kinds of courses at community colleges, local high schools etc.

Take a look at Humber, Centennial, etc.

As funny as it sounds, there's those online correspondance courses that used to be flogged by Sally Struthers lol
 
you can always say "no" to the mechanic and just purchase the services you need (i.e. an oil change should only cost ~$30)

what you are also paying for is the time and the convenience ... you'd have to crawl under the car with a car creeper to DIY

they have tools like an impact wrench and hydraulic lift, which the average person won't have
 
Go and buy a shop manual for your make of car. They're available in Canadian Tire, Parts Source etc. for less than $30. They have a section of diagnosing engine problems, funny sounds etc. and show you step by step how everything comes apart, and hopefully goes together.

Just reading the manual can teach you a lot about cars...
 
Sukdeep said:
Some basic things, like changing engine oil, filters and spark plugs can be done in your driveway.

Couple hundred for an oil change - where are you going - Canadian Tire???

An oil change should be $50-$60 (or $120 if you drive German).

I was thinking the same thing - you must be driving some German wundercar with an 8 litre crankcase full of Mobil 1!

I love to get my hands dirty, but gave up working on my own car 15 years ago. Too many computers controlling things like spark advance, timing, fuel mixture - and I don't have the diagnostic equipment to read 'em.

Ah, I remember the days of setting my points up with a worn dime, and adjusting my carburetor by ear - those days are gone my friends
 
stinkynuts said:
Would like to learn about cars so that I can diagnose the problems, fix them, or even just change my own oil. I'm tired of getting my oil changed and forking over hundreds of dollars each time because some sleezy technician thinks he can take advantage of my ignorance. What is the best way? I'm willing to take some courses.

I picked up my knowledge from watching shows on tv, talking/watching/helping friends who are car savvy. But most of what I learned was from buying the manual for my car and getting my hands dirty.

And should you go the manual route be advised that they are not always the most explicit and understandable (at least to me). Often what they were talking about only became clear after I got under the car and started looking around. "Ahh so that's what the tiny grainy black and white picture was trying to show me" :)

I advise everyone to give maintaining/repairing their car a go... if nothing else it may help to understand why they charge what they do. <grin>
 
ready2rock said:
I was thinking the same thing - you must be driving some German wundercar with an 8 litre crankcase full of Mobil 1!

I love to get my hands dirty, but gave up working on my own car 15 years ago. Too many computers controlling things like spark advance, timing, fuel mixture - and I don't have the diagnostic equipment to read 'em.

Ah, I remember the days of setting my points up with a worn dime, and adjusting my carburetor by ear - those days are gone my friends


Not if you have a Triumph TR6 they're not.

:)

And as far as that goes, the principles are still pretty much the same, just the delivery has changed.
 
james t kirk said:
Not if you have a Triumph TR6 they're not.

:)

Nice ride, JT. What year?
 
If you have a typical car it is hardly worth it to change your own oil. More trouble then it’s worth. The dealerships will take you for all they can during an oil change, as mentioned above, just say no to all the suggested work. Start going to an oil change place.

Learning how your car works and how to change the air filter, light bulbs, windshield wipers, and other stuff is a good idea. A $40 air filter at the dealership is about $10 at Canadian Tire. Doing bigger jobs requires and interests in doing the work, and tools.
 
stinkynuts said:
Would like to learn about cars so that I can diagnose the problems, fix them, or even just change my own oil. I'm tired of getting my oil changed and forking over hundreds of dollars each time because some sleezy technician thinks he can take advantage of my ignorance. What is the best way? I'm willing to take some courses.


There is a lot site you can check. eg

www.autozone.com check the DIY section
www.partsource.ca also has a DIY section but is very limited

or you can check car forums related to your vehicle
 
stinkynuts said:
. What is the best way?.

The best way to learn about cars and car repair is to hang out with car guys.
They're always friendly and helpful because they cannot pass up a chance to showoff how knowledgable they are.
 
I was lucky when young and had a couple buddies who taught me the basics and how to read a shop manual. They went on to become car mechanics. This knowledge saved me tons of money over the years (more for the hobby....;) ) since it is sooooooooo easy to ripoff a rube who knows little about vehicles. Take a car repair & maintenance course if offered at a local comm college or school. They will teach you the basics and tell you what manuals to use.
 
Sukdeep said:
Some basic things, like changing engine oil, filters and spark plugs can be done in your driveway.


Couple hundred for an oil change - where are you going - Canadian Tire???

An oil change should be $50-$60 (or $120 if you drive German).

I have a brand new Toyota. ( less than a year old ) I recently got a call from the dealer telling me to come in for an oil change. The cost to me would be $60. I did it myself for $16. I can not afford to go to the dealer and waste a morning to get my oil changed. It took me half an hour. I even used synthetic oil. When it was only $12. a jug last fall. I stocked up with 6 jugs.
All you need a pair of jack stands and a hydralic jack. Some basic tools and a catch basin for the oil. I figure in the last 15 years I must have saved $15,000 to $20,000 on car maintance and repairs. I even repaired my own car air conditioner by going across the border and getting a can of Freon r132a and refilling it myself, the theiving mechanic wanted $800 to repair my AC and said I needed all kinds of new parts. The AC worked fine for 2 years before I traded the car for this new one, It was still working when I traded the car, otherwise the trade would be worth much less.
 
how to become an expert????

Buy a 40 year old car
 
papasmerf said:
how to become an expert????

Buy a 40 year old car

Dont forget to invest in some good tools. For the diy'r try Princess Auto. Not the greatest but good for the occasional mechanic.
 
Sentry said:
Dont forget to invest in some good tools. For the diy'r try Princess Auto. Not the greatest but good for the occasional mechanic.
FOR MEN ONLY: if you do not understand the basic mechanics of a motor vehicle your lesbian mother let you down.
 
tboy said:
There are all kinds of courses at community colleges, local high schools etc.

Take a look at Humber, Centennial, etc.

As funny as it sounds, there's those online correspondance courses that used to be flogged by Sally Struthers lol

Good advice. There are many college level courses or trade schools that have almost no past experience needed. This exists in the states too. You could probably do much more than change oil after one of these courses.
 
Hang with Car Guys

stinkynuts said:
Would like to learn about cars so that I can diagnose the problems, fix them, or even just change my own oil. I'm tired of getting my oil changed and forking over hundreds of dollars each time because some sleezy technician thinks he can take advantage of my ignorance. What is the best way? I'm willing to take some courses.

I learned from a friend who is a car guy. He worked at Mr. Lube once a week and at fine details a while later, again part time. You learn all the basics doing it for 8 hours, trust me.

For my first oil change, last month I got 4 liters of oil at Wallmart (although check Can Tire, one brand is always on sale) for $10. The filter was $6. That's all it cost. I gave the car a general lube which costs very little, maybe .50 in spray. $16.50 total pus you get to hang with a friend.

To learn it you got to do it.