Having a prototype built.

wazup

Well-known member
Jun 12, 2010
4,276
584
113
I would like to have a prototype built for a new type of screwdriver. Does anyone know any reputable product and development companies, or any companies that will build a prototype. Does anyone have any info on the process. I know most of this stuff is built in China, but was wondering if anyone has been through the process.
 
If it is a prototype then you would have to find a machinist here in Canada to build it. It is easier to have someone in front of you than to try to explain over long distances. Mass production comes later in China.
 
You might want to find an operation with CNC milling equipment to build your prototype.

 
I've been through the development cycle, from back of a napkin to complex machines with full production, operation and service documentation, including prototypes, many times and have some very good contacts.
It depends what stage you're really at. I can't see a new type of screwdriver being too complex, but even the smallest product development project can get out of hand if you don't understand what you need.
Do you have drawings, sketches or just an idea in your head? Do you have a requirements document specifying things like materials to be used, acceptable operation cycles before failure, target production costs for various quantities or just some rough notes? This may seem overly complex for a screwdriver but the answers will help determine the right company or independant contractor to recommend.

As already mentioned, for something like a screwdriver, you're best to get through the prototype stage locally and think about offshore manufacturing for mass production.
 
wazup,

If you have an STL file of the prototype, I may be able generate it on our 3D printer

PM for details.

Glava
 
i agree with what a few have said...

It all depends on what stage your prototype is in...

Is it just an idea in your head? or
Do you have sketches/dimensions of it on paper? or
Do you have it modelled in a 3D software already? if so you could generate an STL file and have it printed into an physical 3D model using a 3D printer for inspection etc

then when you're satisfied with it or make a few changes, you can prepare files to send in for actual production
 
Like Lou said, it is scribbled as a rough sketch on a piece of paper, it is a type of multibit screwdriver, so it is more complex than a typical driver. I went to a local tool and die guy but he didn't seem interested, seemed too busy. He said he would need an auto cad drawing, but got the feeling he wasn't equipped to do it.

I agree that having it made locally is the way to go, but I will have to do more research on how to get drawings done, can autocad do any kind of drawing? It's a combination of in my head and on a rough drawing.
 
stop being an fool and and start being an owner
 
I would like to have a prototype built for a new type of screwdriver. Does anyone know any reputable product and development companies, or any companies that will build a prototype. Does anyone have any info on the process. I know most of this stuff is built in China, but was wondering if anyone has been through the process.

You may want to get a patent lawyer involved sooner rather than later.
 
Back in the day, when multi-blades came only in screw top handled drivers (and no one had yet figure out how to 'capture' the screw-top to keep it from getting lost) my father-in-law designed and prototyped a multi-blade driver that you switched the blades on by simlpy sliding a button on the handle for the needed one. You can buy them now at any hardware store.

When he toured around toolmakers big and small in the GTA he was told, "can't be patented, profits per unit too small for development". So he went home. These days I'd imagine the story's the same, but if you can find a good CAD guy to draw the thing, and a 3D printing company, you can do a slicker prototype than he did.
 
Like Lou said, it is scribbled as a rough sketch on a piece of paper, it is a type of multibit screwdriver, so it is more complex than a typical driver. I went to a local tool and die guy but he didn't seem interested, seemed too busy. He said he would need an auto cad drawing, but got the feeling he wasn't equipped to do it.

I agree that having it made locally is the way to go, but I will have to do more research on how to get drawings done, can autocad do any kind of drawing? It's a combination of in my head and on a rough drawing.

well.. in that case, you might have to shell out some cash to make working drawings/cad models of it if you don't know how to do it yourself. Just having an idea and a 'rough' sketch is a long way from a prototype or the finished product. The tough part is when you start drawing it as built, 1:1 scale.