Hard Drive Power Usage Question

Keebler Elf

The Original Elf
Aug 31, 2001
14,845
507
113
The Keebler Factory
Does a 500 GB hard drive use significantly more power than a 200 GB drive?

In other words, if you're using two 500 GB drives instead of two 250 GB drives, should you be upgrading your power supply? If so, to how much?
 
The eXtreme Power Supply Calculator contains 600+ CPU including latest processors from Intel and AMD such as Conroe, Intel Core 2 Duo, Intel Core 2 Extreme, Intel Core Solo, Intel Core Duo, Intel Xeon, Intel Pentium, AMD Athlon 64, AMD Athlon 64 FX, AMD Athlon 64 X2, AMD Opteron, AMD Sempron 64, 939, AM2, F and LGA775 sockets and latest graphics cards from NVIDIA and ATI such as GeForce 7900 GS, 7900 GTX, 7950 GT, 7950 GX2, Radeon X1900 XTX, X1950 XTX, graphics cards from EVGA and Gigabyte and more. Power supply calculator has the ability to select hard drive type (IDE, SCSI, SATA), NVIDIA SLI or ATI Crossfire technology, cooling fan, PCI card, external device, USB and Firewire, water cooling kit and components, etc. This version of eXtreme Power Supply Calculator determines the overall computer power supply wattage for your desktop computer, server, computer racks or any pc computer system that uses ATX power supply.

http://www.extreme.outervision.com/psucalculator.jsp
 
i believe the capacity of the drive doesn't affect the amout of power it consumes, but more likely how fast it spins (RPM), since the motor should be the component in the harddisk that consumes the most power
but i could be wrong too.
 
Keebler doesn't state the models so we can actually see the specs from the data sheets of the drive.

I suspect the power draw is minimal between the two drives and 2X250 GB drives would draw more power than a single 500 GB model but not significantly more
 
I don't have specific drives in mind. I was just curious if buying new high capacity drives would necessitate an increased power supply.
 
The platters are the same size, it's just the data density which has increased. So I wouldn't expect higher capacity drives to consume more power: if anything, they might consume a tiny fraction less (as the read-write head doesn't have to travel as far most of the time).