Going rate for Drywall tapers?

thewheelman

New member
Feb 3, 2004
575
0
0
Anyone know what the going rate is for drywall tapers?

I have a room, about 35-40 sheets including a stairwell, that needs taping.
 
They work on an time and material basis not on a per sheet basis. This is due to the problems that occur when non-professional boarders install drywall. A crappy install will make a taper's job infinitely more difficult. It also depends on the number of corners, fixtures, etc etc.

Last time I checked the rate was $35.00 per hour plus materials (but this guy was an artist).
 
well..prices will depend on.....
- condition of drywall installed...proper install or not
- corners....joints...
- ceilings to be ready for paint or stipple
- stairwell and other parts of the room access
- location and drying time will affect it...do you have fans and heat and a dehumidifier to speed things along
- who does the sanding them or you....
- touch up after primer coat.....

ballpark off the top of my head.....$2,500....budget
 
how do you not install drywall correctly? I mean, tapered seams butt together and make sure you put on all of your corner beads...

keep in mind drywall tapers salary has only increased $2/hr in the last 18 years!

some recent projects...
1600 sq ft two level home about $2400
2400 sq ft 2level home about $2600
1200 sq ft bungalow.... $1800

i always supply materials and get a $15/hr cash jobbie guy to hang the drywall.
 
I had a pro come by last week and look over my work and the job..600 sq.ft
He quoted me $750 + materials to install the corner beads and make it ready for paint, and I agreed.
He was going to work evenings as he lived nearby.
When I called him back to say I was all ready for him, he said he underquoted on materials and would also now need to pay a helper.
So I'm not sure if he is trying to squeeze me for more $$, or did just underquote.
Still sounds reasonable, I guess.
 
thewheelman said:
I had a pro come by last week and look over my work and the job..600 sq.ft
He quoted me $750 + materials to install the corner beads and make it ready for paint, and I agreed.
He was going to work evenings as he lived nearby.
When I called him back to say I was all ready for him, he said he underquoted on materials and would also now need to pay a helper.
So I'm not sure if he is trying to squeeze me for more $$, or did just underquote.
Still sounds reasonable, I guess.

Yeah, he underquoted.

As for "how do you install drywall incorrectly", you'd be surprised.
1) Butt joints not tight together with a large gap
2) But joints not on the same level (because the owner put them too tight together and couldn't screw down the boards without drawing the screws right through the drywall)
3) Putting them over a stud that protrudes farther out than the others creating a large bow in the board.
4) screwing up corners so that the boards don't meet correctly

It's funny, what seems simple enough can be messed up bigtime by people who don't know what they're doing.
 
tboy said:
Yeah, he underquoted.

As for "how do you install drywall incorrectly", you'd be surprised.
1) Butt joints not tight together with a large gap
2) But joints not on the same level (because the owner put them too tight together and couldn't screw down the boards without drawing the screws right through the drywall)
3) Putting them over a stud that protrudes farther out than the others creating a large bow in the board.
4) screwing up corners so that the boards don't meet correctly

It's funny, what seems simple enough can be messed up bigtime by people who don't know what they're doing.

ABSOLUTELY! A bad drywall job can really screw up a taper... I am not a professional like tboy, but I have finished 5 basements in my time here on the blue planet. Each time I did my own taping, so I know first hand how much of a difference it can make! Each time I got better at it, and learned from the time before. (But of all the things I love about revo's I like taping the least!)