Generator question

If you are looking to buy a small generator, this may be interesting.

http://www.northerntool.com/shop/tools/product_200402909_200402909

Generac Inverter generator for $699 US. ( free shipping ) You can have it shipped to a border town free for pickup at a mail drop.
Generac is a popular brand for commercial and industrial use.

Update

I just found it at US home Depot for $589.

http://www.homedepot.com/p/Generac-...nverter-Generator-5793/202185891#.UaE4OtcVaO0

You can bring it back under your 48hr. - $800 customs exemption, or if it is made in the USA tax free under free trade exemption.
 
Are you saying that DC only comes from battery or "chemically induced" (?) electricity?


You might want to know that "generators" generate Direct Current, and "alternators" produce alternating current.

"According to the almighty Wikipedia, which I shall shamelessly quote with nary a paraphrasing, while still properly citing my source:

"Alternators are used in automobiles to charge the battery and to power all the car's electric systems when its engine is running. Alternators have the great advantage over direct-current generators of not using a commutator, which makes them simpler, lighter, and more rugged than a DC generator. The stronger construction of alternators allows them to turn at higher speed, allowing an automotive alternator to turn at twice engine speed, improving output when the engine is idling. The availability of low-cost solid-state diodes from about 1960 allowed auto manufacturers to substitute alternators for DC generators. Automotive alternators use a set of rectifiers (diode bridge) to convert AC to DC. To provide direct current with low ripple, automotive alternators have a three-phase winding."

Read all about the topic at the link below. Enjoy!
Source(s):
http://en.wikipedia.org/wiki/Alternator
"


so can a water fall create DC?

i always wondered why there was a great debate about making the falls create DC or AC as i thought water can only produce AC (as it spins the magnets)

i am puzzled as to how water could create DC

in AC the electrons go back and forth but in DC the electrons go down the line until there are no more electrons so you need an excess of electrons in one place that are willling to be moved

when all the electrons have been moved the battery runs out


i have always been confused by inverters inverting ac into dc with the use of diodes

diodes allow only a one way flow of current so this turns ac into dc???????

how can a diode turn ac into dc ??

in dc there is a constant supply of electrons that are coming from somewhere (ie chemically stored in a battery )


ac does not create a supply of electrons because all ac does is agitate back and forth motion of electrons with north and south pole magnets so where does the flow of electrons come from that transforms ac into dc ??????????
 
If a spinning wheel on a bicycle can produce DC then a spinning wheel in water can do so as well. then you invert the DC power into AC current.

 
so can a water fall create DC?

i always wondered why there was a great debate about making the falls create DC or AC as i thought water can only produce AC (as it spins the magnets)

i am puzzled as to how water could create DC

in AC the electrons go back and forth but in DC the electrons go down the line until there are no more electrons so you need an excess of electrons in one place that are willling to be moved

when all the electrons have been moved the battery runs out


i have always been confused by inverters inverting ac into dc with the use of diodes

diodes allow only a one way flow of current so this turns ac into dc???????

how can a diode turn ac into dc ??

in dc there is a constant supply of electrons that are coming from somewhere (ie chemically stored in a battery )


ac does not create a supply of electrons because all ac does is agitate back and forth motion of electrons with north and south pole magnets so where does the flow of electrons come from that transforms ac into dc ??????????

Depending on the way the brushes of the generator are set up, the rotational motion can generate either AC or DC current

This old-school video shows the difference fairly well:

 
Depending on the way the brushes of the generator are set up, the rotational motion can generate either AC or DC current

This old-school video shows the difference fairly well:


this does not explain where the electrons are coming from in dc
 
Isn't it Maxwell's Demon who takes care of that petty detail?

no as that demon explains how it is theoretically possible to decrease entropy ( ie a broken cup repair itself)


i will explain what i do not understand


1 DC current is one way movement of electrons to the source of resistance (ie light bulb) until there are no more electrons to be moved (ie the battery runs out of excess electrons that have been chemically stored)

2 AC is the excitment of electrons back and forth (but they do not go down the line just the excitement does)

3 how can an AC alternator be turned into a DC generator that creates a DC current if there are no excess electrons stored up to be moved ???


where do the excess electrons come from that are going down the line ???



i cannot find this answer on the net

i am missing something conceptually


help
 
Imagine adding 1 cup of water to a very long and empty steel pipe. It would take a long-time for the water to reach the other end.

Now, consider a very long long steel water pipe already filled with water. If the pipe is already full of water, then adding another cup will force a corresponding cup out the other end of the pipe, and the velocity of this transference will be at the propogation velocity of a pressure wave in the steel pipe. (For water, pressure waves propogate at approximately the speed of sound in water.) Thus, adding a cup of water to a full pipe will almost immediately displace a different cup of water at the end of the pipe. However, these will be different cups of water.

It is important to distinguish between energy transfer and matter transfer. Suppose a cup of red jello (instead of water) to the very long full water pipe. One cup of water will come out the end. Eventually, if enough red jello is added to the inlet, red jello will emerge from the outlet. However, this could take a really long time. Thus, in a full water pipe, energy transference (the motion of water in and out of the pipe) occurs at a different velocity than matter transference (the length of time it takes one cup of jello to reach the other end of the full water pipe.)

Real-life materials are full or almost full of electrons. Hence, when a new increment of electrical energy is added to a copper conductor (wire), it propogates at the speed of light in copper. The actual electrons in the copper conductor don't move very quickly at all. I don't have the number at hand, but relative to the speed of light, any given electron moves very slowly. However, the corresponding electrical energy moves almost instantly.

The conversion of AC energy to DC energy works because energy is being captured and stored. If you think of two full pipes of water, it is possible to capture water from one, and place it in the second. Then reverse, and place water in the first from captured water in the second. The water doesn't actually move anywhere (much), but with the appropriate sequence of check valves (electrical diodes) it is possible to get a net energy differential to show up at a water wheel (load).
 
Imagine adding 1 cup of water to a very long and empty steel pipe. It would take a long-time for the water to reach the other end.

Now, consider a very long long steel water pipe already filled with water. If the pipe is already full of water, then adding another cup will force a corresponding cup out the other end of the pipe, and the velocity of this transference will be at the propogation velocity of a pressure wave in the steel pipe. (For water, pressure waves propogate at approximately the speed of sound in water.) Thus, adding a cup of water to a full pipe will almost immediately displace a different cup of water at the end of the pipe. However, these will be different cups of water.

It is important to distinguish between energy transfer and matter transfer. Suppose a cup of red jello (instead of water) to the very long full water pipe. One cup of water will come out the end. Eventually, if enough red jello is added to the inlet, red jello will emerge from the outlet. However, this could take a really long time. Thus, in a full water pipe, energy transference (the motion of water in and out of the pipe) occurs at a different velocity than matter transference (the length of time it takes one cup of jello to reach the other end of the full water pipe.)

Real-life materials are full or almost full of electrons. Hence, when a new increment of electrical energy is added to a copper conductor (wire), it propogates at the speed of light in copper. The actual electrons in the copper conductor don't move very quickly at all. I don't have the number at hand, but relative to the speed of light, any given electron moves very slowly. However, the corresponding electrical energy moves almost instantly.

The conversion of AC energy to DC energy works because energy is being captured and stored. If you think of two full pipes of water, it is possible to capture water from one, and place it in the second. Then reverse, and place water in the first from captured water in the second. The water doesn't actually move anywhere (much), but with the appropriate sequence of check valves (electrical diodes) it is possible to get a net energy differential to show up at a water wheel (load).

whew

great answer cassini ( i think )

so you are saying there is no movement of electrons, just energy tranference , when a generator is used ?

DC is simulated by diodes allowing only one magnetic pole to effect the electons which means the current is not AC ?

does this mean there are two kinds of DC current? one where actual electrons travel down the current and one where they do not (only the energy travels down the current) ?

and it runs the same the same equipment a battery would run ?

still does not make sense to me


DC requires electron flow

if it is just energy flow then it is AC IMHO


CLEARLY I AM WRONG SOMEWHERE IN MY THINKING AS IT WORKS
 
Last edited:
Electrons, Flow, and Conductors

Name: George
Status: student
Grade: 9-12
Location: IL
Country: N/A
Date: 10/2/2005

Question: Recently I took a tour of a hydroelectric plant (a dam) on a river in Montana. The question I had was where did the electrons come from in the wires to provide electrical power to the grid. More specifically, why did they not have to occasionally replace the wires in the generators because they would eventually run out of electrons? They indicated that they hardly ever replaced the wires (usually if the insulation were to break down - which was very seldom). I was later told that the electrons really did not flow in the conductors. They stayed in the outer orbits of their respective atoms and only "bumped" the electrons in the neighboring atoms which caused the perception of "current flow". This is why the electrons in the generator never depleted their electrons.

This answer seems to contradict everything I have to date learned about electron "flow" in a conductor, but seems to answer the question of a net loss of electrons in a conductor (exhausting its electrons). What is the correct concept to understanding electron flow in a conductor in the example above and will electrons eventually exhaust?



George,

The electrons do flow through the wires, but they never leave the wires. This is why you need something called a complete circuit. The power plant pushes electrons through the wire. Electrons do not like to be near electrons because they have the same electric charge. The electrons that were moved forward in the wires then cause more electrons to move. This continues around the circuit. Also, electrons from behind tend to be attracted by the metal atoms that are now missing an electron. They fall in behind to replace the first electrons.

After a very short time, the electrons throughout the circuit fall into a regular pattern. Energy goes from the power plant to the moving electrons. Energy goes from the moving electrons to the devices, such as the light bulbs and televisions of the area. More energy is given to the electrons. More energy is transferred to the lights and TVs. All the loose electrons move at the same time, almost like water flowing around in a circular tube. The power plant tries to speed up the electrons. Electric devices try to slow them down. They quickly reach a balance. You never need to replace electrons because they always come back.

This is why you need two prongs on a plug for it to work. Electrons go in one and out the other. Passing through the device is what allows energy to be transferred.

Dr. Ken Mellendorf
Physics Instructor
Illinois Central College
 
Electrons, Flow, and Conductors

Name: George
Status: student
Grade: 9-12
Location: IL
Country: N/A
Date: 10/2/2005

Question: Recently I took a tour of a hydroelectric plant (a dam) on a river in Montana. The question I had was where did the electrons come from in the wires to provide electrical power to the grid. More specifically, why did they not have to occasionally replace the wires in the generators because they would eventually run out of electrons? They indicated that they hardly ever replaced the wires (usually if the insulation were to break down - which was very seldom). I was later told that the electrons really did not flow in the conductors. They stayed in the outer orbits of their respective atoms and only "bumped" the electrons in the neighboring atoms which caused the perception of "current flow". This is why the electrons in the generator never depleted their electrons.

This answer seems to contradict everything I have to date learned about electron "flow" in a conductor, but seems to answer the question of a net loss of electrons in a conductor (exhausting its electrons). What is the correct concept to understanding electron flow in a conductor in the example above and will electrons eventually exhaust?



George,

The electrons do flow through the wires, but they never leave the wires. This is why you need something called a complete circuit. The power plant pushes electrons through the wire. Electrons do not like to be near electrons because they have the same electric charge. The electrons that were moved forward in the wires then cause more electrons to move. This continues around the circuit. Also, electrons from behind tend to be attracted by the metal atoms that are now missing an electron. They fall in behind to replace the first electrons.

After a very short time, the electrons throughout the circuit fall into a regular pattern. Energy goes from the power plant to the moving electrons. Energy goes from the moving electrons to the devices, such as the light bulbs and televisions of the area. More energy is given to the electrons. More energy is transferred to the lights and TVs. All the loose electrons move at the same time, almost like water flowing around in a circular tube. The power plant tries to speed up the electrons. Electric devices try to slow them down. They quickly reach a balance. You never need to replace electrons because they always come back.

This is why you need two prongs on a plug for it to work. Electrons go in one and out the other. Passing through the device is what allows energy to be transferred.

Dr. Ken Mellendorf
Physics Instructor
Illinois Central College

Something is wrong with this explanation....it might be close for a DC circuit but not for an AC circuit. In your house you have a black wire and a white wire for a 120 V circuit....which lends itself to the thought that it is like a DC circuit...more or less as described above. But that thought ends when you look at the panel box carefully...the white wire is neutral, or grounded and so unless the electircity flows through the ground back to the generating point there is no "round trip" type of circuit. The reason is that there is no round trip...only a push/pull type action. So in general there is no movement of electons around a circuit in AC. At least that's how I see it.
 
does this mean there are two kinds of DC current? one where actual electrons travel down the current and one where they do not (only the energy travels down the current) ?

Actually, there are two different types of DC. When people talk about static electricity, electrons really do move, and that is why hair stands on end when a balloon is rubbed against it. However, the problem with static electricity is no significant energy transfer takes place, and when it does, it is often in the form of a sudden lightening/spark/plasma discharge. In fact, a sudden release of static electric energy must be in the form of a lightening/spark/plasma discharge, because it involves the rapid transference of a large number of unbound electrons. These sudden discharges make static electricity useless for most purposes.

For electrical circuits, the circuit is in a closed loop (DC or AC), and the electrons can be assumed to be stationary. Energy is simply being transferred. You have two water pipes. With a DC circuit, one is consistently an outlet, and the other is consistently an inlet. With AC, the water pipes alternate between being outlets and inlets. For both DC and AC circuits, the load never gets a net amount of electrons. Water always moves from an inlet to an outlet, and the energy transference occurs because the inlet and outlet are at different pressures (voltages).

Many electrical texts describe the black wire in a circuit as the "live" wire, and the neutral as the "return wire", just as water pipes have outlets (feed pipes) and inlets (return pipes).
 
Something is wrong with this explanation....it might be close for a DC circuit but not for an AC circuit. In your house you have a black wire and a white wire for a 120 V circuit....which lends itself to the thought that it is like a DC circuit...more or less as described above. But that thought ends when you look at the panel box carefully...the white wire is neutral, or grounded and so unless the electircity flows through the ground back to the generating point there is no "round trip" type of circuit. The reason is that there is no round trip...only a push/pull type action. So in general there is no movement of electons around a circuit in AC. At least that's how I see it.

that is how i see it

the magnets (magneto) in the generator are negative then postive then negative etc and spun rapidly by the water

as it spins it influences the electrons in the coils wrapped around it (which have arbitrarily been named negative )

the electrons are attracted then repulsed then attracted etc

producing alternating current

no electrons flow only the energy as this attraction/repulsion would go down the line indefinitely if not for the resistance of the wire


however, Niagara Falls can also produce DC wth the right type of generator

the only reason they use AC is that is travels further with less power loss


in DC there is a movement of electrons

IE in a battery there is an excess of electrons chemically stored in one end that desire to travel to the other side of the battery where there are a shortage of electrons

where do the electrons come from in a DC generator remains my question

if there is no movement of electrons in generated DC is this not AC ?
 
With the greatest kindness and sense of helpfulness yoga face, I again suggest that you abandon every thought or logical understanding of electricity and start fresh.

ok


BTW what are your quaifications for such an assessment?

i never took a physics course (probably would have flunked anyways)


but i do believe post 34 demonstrates my fundamental understanding of electricity as the movement of electrons and that there are 2 ways they move AC and DC

i suspect a DC generator must have a closed circuit to allow the electrons to return where AC does not require a closed circuit because the electrons do not have to return

AC requires only a ground to be active

i think

therefore i am

i think
 
ok


BTW what are your quaifications for such an assessment?

i never took a physics course (probably would have flunked anyways)


My qualifications for that assessment are reading your posts. :frusty:

I understand electricty, both AC and DC and how they are generated and how the energy is transmitted and utilized. But to explain it blindly over an internet forum is not easy, especially when you have to undo someone's preconcieved ideas and beliefs. And even mores when that person is so attached to them that they take it personally when the issue at hand is being challenged.

You know the old saying about knowing just enough to be dangerous? Well you know just enough to think you know electricity, but you don't know near enough to know you really are so far off that you need to start over. Fresh. Trying to de-program your beliefs is not easy.
 
My qualifications for that assessment are reading your posts. :frusty:

I understand electricty, both AC and DC and how they are generated and how the energy is transmitted and utilized. But to explain it blindly over an internet forum is not easy, especially when you have to undo someone's preconcieved ideas and beliefs. And even mores when that person is so attached to them that they take it personally when the issue at hand is being challenged.

You know the old saying about knowing just enough to be dangerous? Well you know just enough to think you know electricity, but you don't know near enough to know you really are so far off that you need to start over. Fresh. Trying to de-program your beliefs is not easy.

i agree with your personal attachment to beliefs theory

however, i am not offended at all in your challenge of my preconceptions

however, to undo them and start anew takes mental work by both teacher and student




if i discover the answer to my question i will let you know and make you proud
 
that is how i see it

the magnets (magneto) in the generator are negative then postive then negative etc and spun rapidly by the water

as it spins it influences the electrons in the coils wrapped around it (which have arbitrarily been named negative )

the electrons are attracted then repulsed then attracted etc

producing alternating current

no electrons flow only the energy as this attraction/repulsion would go down the line indefinitely if not for the resistance of the wire


however, Niagara Falls can also produce DC wth the right type of generator

the only reason they use AC is that is travels further with less power loss


in DC there is a movement of electrons

IE in a battery there is an excess of electrons chemically stored in one end that desire to travel to the other side of the battery where there are a shortage of electrons

where do the electrons come from in a DC generator remains my question

if there is no movement of electrons in generated DC is this not AC ?

I think the crucial issue is realizing that there is a difference between static electricity (where charges move), and electric circuits (where energy moves.) In electric circuits, a return path for the electricity always exists. However, with static electricity, electrons are stored and moved.

With either DC or AC electric circuits, no significant movement of electrons occurs. The DC generator at Niagara falls is almost identical to an AC generator at Niagara falls, except for the addition of a component that makes the AC into DC. Additionally, the rate of movement of electrons is known as the drift velocity. With AC, the electrons move back and forth about 0.002 mm every cycle, on average. With DC, at a drift velocity of 0.1 mm/s (or less), it takes hours for an electron to move about a circuit of any size.

There is also a problem with the explanation for a battery. People like explaining batteries in terms of electron flow, however the explanation is fundamentally wrong. The terminals of a battery are at two different energy potentials (voltage is energy potential), and the differential between these potentials is what drives energy around a circuit. This effect becomes particularly obvious when you realize a battery only does work (lights something up or makes something move), when a complete circuit is present between both its wires.

With electricity, at some point it becomes necessary to make the jump from practical comparisons to theoretical descriptions. Electricity doesn't make proper sense until you use the appropriate mathematical descriptions. Grade school teachers love descriptions of circuits with electrons moving, however theoretically, it isn't a correct description. Yoga Face is confused by the grade-school description of electricity, because once you start thinking about the grade-school description, it makes no sense whatsoever.

The grade-school description conflates static electricity with magnetism and electric circuit theory, when they are fundamentally different concepts. This is really obvious when reading any proper physics and electricity text, because different units are used for static electricity (charge transfer) and circuits (current/voltage/energy transfer).
 
that is how i see it

the magnets (magneto) in the generator are negative then postive then negative etc and spun rapidly by the water

as it spins it influences the electrons in the coils wrapped around it (which have arbitrarily been named negative )

the electrons are attracted then repulsed then attracted etc

producing alternating current

no electrons flow only the energy as this attraction/repulsion would go down the line indefinitely if not for the resistance of the wire


however, Niagara Falls can also produce DC wth the right type of generator

the only reason they use AC is that is travels further with less power loss


in DC there is a movement of electrons

IE in a battery there is an excess of electrons chemically stored in one end that desire to travel to the other side of the battery where there are a shortage of electrons

where do the electrons come from in a DC generator remains my question

if there is no movement of electrons in generated DC is this not AC ?
Although Edison's admirers hushed it up, the main reason his championing of DC current distribution sytsems lost out to Westinghouse's AC was the difficulty of collecting all the electrons that spilled out of unused electrical sockets. In a horse and wagon era, the clatter of wagons and the calls of their drivers making the rounds every morning was a huge nuisance. Having to keep the maids who were supposed to be expendable thanks to Mr Hoovers convenient machine and having to train and equip them to manage kilo-vaults full of electrons until the Edison Man came was a great disappointment to those managing great houses, and the minor silliness of cute little Westinghouse electrons popping alternately out and tidily back in was almost enjoyable by comarison.