Car question - upper ball joints

newtohobby

New member
Jul 22, 2006
445
0
0
I need new rear upper ball joints. I was quoted $515 taxes included with parts, labour and aligment. 2.2 hours of labour and 76 for each part. 80 bucks for alignment. What do you think of this price? its for a 2003 chrysler sebring. thx
 
Call and get quotes on the parts yourself, should help you determine if the rate is fair.

Good advice, I always do this, and let the garage know ahead of time that I wil be shopping around for parts pricing.
 
It's fair enough.
 
One thing that has floored me is the price of parts alone... even when discounted to 50 per cent. We do a lot of labour ourselves, and some work is still expensive.
 
Chrysler Sebrings are front wheel drive. I think the garage wants to replace the tie rod ends and an alignment is necessary if that's the case. Price sounds about right. 2.2 hrs labour is working at a leisurely pace, but $80 isn't bad for an alignment. $76 each for tie rod ends is on the high end, but worth it if it is a brand name part. Cheap tie rod ends wear very quickly, and leave you back where you started. Car has to be put on a lift, the tires removed, tie rod ends separated from the spindles with either a pickle fork or press, and new ones threaded on as close to the original positions as possible. Then they put the wheels back on and align the car. Right side tends to have more wear than the left because the right side is the curb side.
 
If you are willing to travel to waterloo, I know I guy that will do head gasket replacement etc. for parts plus $80 labour - thats how cheap he is.
 
Check out partsgeek.com or autopartsway.ca in Canada. Also, check amazon or ebay if possible. You can get parts shipped to po box in niagara falls, ny and go over and pick up if you really wanted to save. I got oxygen sensor for $59 off of amazon and at CT, they wanted $166. You can buy a muffler off of partsgeek for $65 and install it yourself instead of paying hundreds at a muffler shop in Canada. Just examples.