Building Custom Guitars

Bif_Butkiss

Active member
Apr 1, 2004
1,304
0
36
Toronto
OK guys... Here's a new one for ya.

I've been asked to make a series of custom painted electric guitars and I need to find a shop / supplier in the GTA where I can buy top quality parts (everything from unfinished bodies and necks to electronics).
I've checked out different websites as well as Ebay and there's just too many options available so I'd like to see the parts in person to see exactly what I need.
I'll be making at least 2 of each, Strat's, Tele's and Les Paul style bodies and maybe a few bass' guitars as well.
I've talked to people at both Steve's Music in T.O. and Long & McQuade in Brampton without much luck.
Does anyone have any "serious" ideas?
 
It's been nearly 20 years since I built (actually, heavily customized) a guitar - I'd bought a lower-end Gretsch electric that had a particularly nice neck, then made a custom body for it, and upgraded the pickups, bridge and tuning heads. What I ended up with was very much like a Les Paul. The wood-working I did was reasonably simple - I bought a slab of hardwood, used a friends bandsaw to cut out the rough shape and then hand tools - chisels, planes and lots of sand paper - to finish the job.

You need to be clearer on what it is you're planning to do - if all you want to do is custom paint them, then why not simply buy factory made guitars, strip the existing finish and then do your custom work on that? If you're looking at solid bodies, like all the models you mentioned, it takes about 15 - 20 minutes to remove all of the hardware and electronics, some of them even have removable necks, so you can get aggressive when removing the factory finish.

TERB is not the right place to go looking for this kind of advice - I don't remember any off-hand, but there are many websites by and for custom-built guitar enthusiasts out there. Lots of them trade parts, or could put you in touch with dealers who stock them.
 
hey OP... i share your love of Guitars. i have a few books collected regarding the building of Elec and Classical Guitars but time never makes itself available. i mainly got my books and parts locally. But use restraint if you get tools.. especially from Lee Valley. but if you don't mind i trip out the GTA i think Guitar Clinichttp://www.shophamilton.ca/Guitar-Clinic__L8L-6C1__905-522-1582/ (if they are still around).
other than that A&M woods http://www.amwoodinc.com/ in Cambridge is the better wood place. ENJOY
 
Well, I guess I was wrong about TERB not being a good source of info...

Steve Harper, looking at your link to the 12th fret, I see a guitar nearly identical (model and vintage) to the one that I re-built is being offered on consignment for $2999! Damn, I'm going to have to start treating mine with a bit more respect.
 
You best attend MIAC on the May Long weekend where all the music types display their stuff. www.miac.net

Haha I attended two years ago with another terbite, a lady. A friend who I hadn't seen asked if she was my new wife!
Dougie
 
Someone's already suggested that I try buying factory finished guitars, tear them down and refinish them. I may have to do that for my first one or two just to get a feel for things. I have looked at Squires and MIM (Made in Mexico) Strats for some ideas. I have a problem with spending $$ on finished guitars when I'm going to throw a lot of the parts out when I upgrade them which is why I was looking for "bare bones " suppliers.
Most of the guitars I want to make will be solid body and maybe a hollow body Les Paul. The bass' will be solid body as well..... I wanted to make a "Rikki" bass for my customer but he put the carbash on that idea.
With the cost of the Squires in mind wouldn't it be easier to buy one of the SAGA kits on Ebay and build the guitar the way I want from there?
 
Have you tried contacting Fender or Gibson and explaining this project? I'm sure they could set you up with everything you may need.
A bonus is, if they like your ideas and believe that this could be good exposure for their products (eg. A public art showing), they may give you some items for free or offer a large discount to you.
 
I'd hit a couple of pawn shops for your "practice" guitars
 
Actually, I got my Fender Precision (59 neck on a 63 body) at a pawn shop in London On for $75. It had been spray-painted electric blue. Stripped it down, finished it in flat black. Looked great and played better.
 
What level of acoustic performance are you aiming for?

Making good guitars requires serious skill and/or technology. Plan on building many guitars before understanding how sound is affected by choice of wood and materials. For acoustics, everything matters. Wood, glue, shape, materials, heat treating, finish, paint, ...
 
building customs guitars?

don't they need guns, not guitars?
 
What level of acoustic performance are you aiming for?

Making good guitars requires serious skill and/or technology. Plan on building many guitars before understanding how sound is affected by choice of wood and materials. For acoustics, everything matters. Wood, glue, shape, materials, heat treating, finish, paint, ...

Actually that's why I was looking for "bare bones"suppliers. I'm hoping to find good quality bodies and necks that have all the shaping, routing and drilling already done and are ready to be finished. There are quite a few suppliers out there and many more choices but most of the suppliers are in the States. I have tried to email several of them directly with ZERO success (so much for customer service) which is the main reason why I would like to find a place in the GTA where I could go in, discuss my project with a sales rep., hold the body or neck in my hands and see first hand what they suggest. Plus doing it this way would allow me to choose products made of different woods that would better suit my designs.