amateur electrical

IMHO being an amateur electrician is like being an amateur Doctor. Get a certified electrical contractor for the job.
Remember the Seinfeld episode about the two Russian cable guys? "What's an outlet? Oh the holes the holes!
 
What amperage is the output of the generator?? is it more than 15A? That is all that most "120V house plug" are rated for, along with the wire.. Chances are that you do not have 20A t-slots and 12AWG wire installed.

What difference does that make? The service coming into my house is 100A. There isn't a circuit in the place that has heavy enough gage wire for 100A except for the splitter into the panel. As long as no appliance draws too much power over the circuit, it doesn't matter. Just because he feeds 20A into the panel, there isn't 20A constantly flowing through each circuit. Yes, the wire could melt if he runs too much current through the circuit, but that could happen regardless of the generator running or the main power feeding it.
 
Sooooo many things wrong with this post...
…edit…

… I don't invite idiots to my cottage.…

…I know what I know and I know what I don't know... no electrician has ever been needed to fix a mess of mine... I'm smarter than that... …
And yet you're asking for life and death level electrical advice from pooners on an escort board. What was wrong with the 4,000,000 plus Google hits on this topic, that you came to us? Was it that so many said it was dangerously stupid? Presumably you don't ask advice from idiots, and don't number us among those you wouldn't invite to the cottage, but so far it reads like that's because there's an ample supply in residence.

Either connect it right, with a transfer switch, or live with separate genny-only circuits, whether as temporary extension cords or tidier and more permanent wiring as CeilingCat and others described. Even idiots deserve to be protected from dangerous wiring installed according to who knows what idea of safe.
 
Install a double 40 amp breaker into your panel and wire up a pony panel to it. Have a breaker lockout for when you will use the generator. Wire a plug to the pony panel and when necessary plug this into the generator but first open the main breaker to your panel and lock it out using the breaker lock and a lock. Start the generator and turn on the breakers that you want to use for temp power.
 
The people who simply wired separate receptacles for the few lights they want to power in an emergency have the right idea. It is much the safest way.

Alternatively, you can wire a separate panel, that is designed for generator usage, and hook up stuff like furnaces and sump-pumps to that separate panel.

The reason why you don't back-feed the panel is not because you can't. You can. In a real emergency, it will probably work. However, sooner or later, someone will turn on the main breaker and the secondary generator breaker simultaneously. At that point, you will power up your incoming electrical feed. This can give the hydro service person a serious jolt and potentially kill him, when he shockingly discovers that a confirmed dead hydro-line has power on it.
 
Install a double 40 amp breaker into your panel and wire up a pony panel to it. Have a breaker lockout for when you will use the generator. Wire a plug to the pony panel and when necessary plug this into the generator but first open the main breaker to your panel and lock it out using the breaker lock and a lock. Start the generator and turn on the breakers that you want to use for temp power.

Good suggestion! Thank you!
 
The people who simply wired separate receptacles for the few lights they want to power in an emergency have the right idea. It is much the safest way.

Alternatively, you can wire a separate panel, that is designed for generator usage, and hook up stuff like furnaces and sump-pumps to that separate panel.

The reason why you don't back-feed the panel is not because you can't. You can. In a real emergency, it will probably work. However, sooner or later, someone will turn on the main breaker and the secondary generator breaker simultaneously. At that point, you will power up your incoming electrical feed. This can give the hydro service person a serious jolt and potentially kill him, when he shockingly discovers that a confirmed dead hydro-line has power on it.

I'm still struggling to understand exactly what kind of friends you people associate with... "Oh hi Bob! Thank you for your generous invitation to spend the weekend at your cottage... Do you mind directing me to your electrical panel? You know, in case I get bored."

And to all you haters out there... yes, my idea is totally against code and not really 'standard practice'... but if you do the math, it is actually quite safe.
Circuit breakers exist for a reason...
And remember... my purpose for this is to provide LIMITED BASIC functionality during extended outages.

Turns out I think I'm gonna do the right thing and install a transfer switch...
 
Destillat, take some advice. A lot of knowledgeable people have pointed out the flaws in your plan.

These safety codes exist for a reason. YOU may think you don't invite "idiots" into your home, but someone is not an idiot for turning on an emergency generator. They don't know how you have it wired. They've seen you do it before, and they go and do it themselves, not realizing that you had taken the extra step of shutting off the main.

Do it right. It won't cost you that much extra and it eliminates the possibility that somebody gets killed, your house burns down, etc.
 
I'm still struggling to understand exactly what kind of friends you people associate with... "Oh hi Bob! Thank you for your generous invitation to spend the weekend at your cottage... Do you mind directing me to your electrical panel? You know, in case I get bored."

And to all you haters out there... yes, my idea is totally against code and not really 'standard practice'... but if you do the math, it is actually quite safe.
Circuit breakers exist for a reason...
And remember... my purpose for this is to provide LIMITED BASIC functionality during extended outages.

Turns out I think I'm gonna do the right thing and install a transfer switch...

Wow, that says it all. I'm speechless, all for just wanting to be right. Don't know why you call people who are giving you great advice and want you to do work according to code as haters, actually you should be thanking them.
 
I'm still struggling to understand exactly what kind of friends you people associate with... "Oh hi Bob! Thank you for your generous invitation to spend the weekend at your cottage... Do you mind directing me to your electrical panel? You know, in case I get bored."

And to all you haters out there... yes, my idea is totally against code and not really 'standard practice'... but if you do the math, it is actually quite safe.
Circuit breakers exist for a reason...
And remember... my purpose for this is to provide LIMITED BASIC functionality during extended outages.

Turns out I think I'm gonna do the right thing and install a transfer switch...
It's never wrong to do things right. <applause> You may save the life of some lost, freezing guy who breaks in to shelter during a blizzard. Or the stupid boyfriend of the daughter of the folks you sell to.
 
Yes these safety codes are redundant. They have so many protections that multiple things have to go wrong before someone dies. Someone has to fail to follow your strange and different instructions, a fuse has to fail, the lineman had to forget to check the "safe" line for power, etc., before it really goes badly. But you have stripped away one level of protection by not having that transfer switch, meaning that fewer things have to go wrong before someone dies. Electrical systems are complicated and dangerous. There is a reason why we wrap them up with so many different protections.

I liken it to firearms safety. There are a number of rules that everyone is supposed to follow to ensure accidents don't happen, and again, they are redundant: Keep your firearm pointed in a safe direction, keep your finger away from the trigger, always prove that it's unloaded and safe when not in use. Yeah, it's redundant -- if your finger isn't on the trigger, who cares where it's pointed? If it's pointed in a safe direction, who cares if your finger is on the trigger? If it isn't loaded what's the harm in pointing it at someone?

But there are multiple levels of safety there for a reason--accidents happen. At some point, by accident, you WILL sweep someone with the muzzle of that firearm unintentionally. At some point, by accident, you WILL slip your finger into the trigger guard by mistake. One day you WILL leave a round in the chamber when you unload it. If you were following all the other rules, nothing bad happens. Multiple things have to go wrong before someone dies.

But if you were doing the bare minimum--relying entirely and only on not pointing it at someone, then oops, one mistake is all it takes. Where life is at stake we usually want to require at least three different things to go wrong before it results in death -- the odds of pointing it at someone by accident AND having your finger twitch are too high. We require your finger out of the trigger guard as well, so that it would actually take THREE things going wrong to be a tragedy. Only two things going wrong is too much risk.

With the electrical code, like with firearm safety, you have to make multiple mistakes before somebody dies. And that's fucking important.
 
so you go on the internet to get advice about something as clearly dangerous as backfeeding a system

you have no way of really knowing if anyone knows WTF they are talking about

yet you think you are smart enough to pull it off

you do not know what you do not know and are behaving foolishly and when you are so told you get defensive
 
Are there any set ups for sale that would combine Solar, wind and propane to enable us to get off the ever more expensive grid?
 
Are there any set ups for sale that would combine Solar, wind and propane to enable us to get off the ever more expensive grid?
I know somebody that did that because they wanted to build a house about 4 miles from the nearest hydro pole. Cost about 30000.

A different question though: how do you prevent solar panels and other generators from backfeeding the grid during a power failure?
 
so ya, i'm a bit of an amateur electrician... i know what i can do and i know what i can't do...

i've got a cottage that has regular power failures that can last from minutes to days...
i want to get a generator to support basic functionality...

i know that the 'right' way is to get a transfer switch installed, etc, etc...
but, since it is just a cottage, i don't want to invest too much into it...

my understanding is this:
-city power goes down
-i open main breaker to disconnect house from grid
-power up generator
-plug generator in to 120v house plug (this will light up one side of the electrical panel)
-or, plug generator in to 240v house plug (which will light up the whole electrical panel)

obviously, load and capacity is an issue, but right now i am just trying to confirm that my logic is correct or incorrect...
any electricians out there that can comment?
What a revolting idea! I'm positively shocked!! Watt were you thinking!!!