Old VHS Tapes

You might want to get a throwaway or cleaner tape to 'exercise' the player with occasionally. You will have to maintain it along with the masters, or hope someone else did. Tape conservators tell me the binders holding the oxide to the tape dry eventually so the next playing scrapes the oxide (and the info encoded) into oblivion. Humidity is the stopgap, so they say.

Wrongo with respect to humidity!

http://www.tri-magnetics.com/stor_recomm.htm

Any one who bought american sourced magnetic tapes in the 70s to the 90s would have experienced the hydrolysis issues that came about due to the inappriopriate urethane components in the binders that were used during that era. Google 'If I knew you were coming I would have baked a tape' to learn more.

http://www.tangible-technology.com/tape/baking1.html

http://www.deepskyaudio.com/tapes.htm

Keep your tapes relatively dry, not humid!

BTW, I have an analog tape that is an original recording on a BASF reel off the air of CFRB's tribute to Winston Chrchill on his death in 1965 and it is quite playable!
 
Last edited:
How can I get rid of old VHS tapes? Nothing important on them just old TV shows, movies with commercials etc. Ideally would like to recycle.

I will probably just throw mine in the garbage. Haven't played them in at least 3 years. The ones older than 12 years are probably way too grainy now. VHS tapes have very short shelf lives. It is amazing that some paper books are 600 years old.
 
VHS tapes have very short shelf lives.....

Not really!
I have home VHS home movies from 1980 that still look/play very well.
 
The older the tapes the better the quality. In the mid 90's quality went way down, but so did price.

Agreed.
I always went with top rated tapes like TDK and BASF and never had ant issues with them.
 
I use to tape some TV shows on VHS. The tapes from the 1990's have now all turned to "mush". Useless.

My TDK SA tapes held up very well.
 
I use to tape some TV shows on VHS. The tapes from the 1990's have now all turned to "mush". Useless.
It depends on who made the tape media. Even Ampex, a highly regarded professional tape manufacturer, as well as 3M, had suffered a problem with urethane component that was added to the binder formulation. To get an average molecular weight, some bright ass supplier mixed low MW with high MW urethane. The problem was that low MW urethane was subject to hydrolysis from the moisture in the air, and went literally to mush. Not good when your tape gets gooey. My Revox suffered badly when the tape stuck to the guides with these American tapes. I don't recall if the Germans or the Japanese had these issues. I didn't have any issues with either the German or Japanese tapes from that era.