New Laptop Required - Recommendations????

Would your company even allow you to run Windows 10 on your laptop when it comes out?. Most if not all corporate IT departments mandate a specific version of Windows and control all of the software on it. You should be able to reinstall Windows 10 on top of Windows 7 without reinstalling all of the software, but this is usually not the best course of action since it can bugger up your machine if you're not careful. Your company might have an extended service agreement with Microsoft for keeping Windows 7 around longer.

I assume you use Virtual PC or VMWare to run Fortran programs on your PC? This should not be a particular pain since the virtual PC's are just a single file. You'd just have to make sure that the file is still present when you install Windows 10 and that you have a compatible versions of Virtual PC or VMWare.

The laptop is my own. No company involvement other than they pay for it. Sort of like, "bring your own phone", well, with me it's "bring your own laptop and phone" I like this.

You are correct, I am using a virtual PC to run the fortran analysis programs I use. I even have one really old analysis program that runs on DOS. I have it installed on an old old Toshiba laptop that runs windows 95.
 
I would recommend looking into gaming level laptops they come with a good video card and processor asus rog will run you around $1200-800 depending on model. These kind of laptops should be able to perform the tasks you need it for, only problem is they are rather bulky (they have good batteries) they also have good resolution and usually are in the 15''-17'' range with screens (pending on model).

If you really need the stuff off your old hdd you could always take it out of your current laptop and buy a external kit and turn that hdd into an external. though asus rogs do come with an expansion slot for an ssd, you could put that hdd in there.

Not into a heavy machine.

I don't game. At all. At most, I may tune into my Netflix account on the road rather than watch the shit on TV.

15" is probably as big as I want to go.

Slugging that bag all over high hell is giving me warped shoulders.
 
I can justify dropping up to 2k out the door.

I'd like to get a 1 TB SSD if it exists.

.....

The other thing is that Windows 10 is coming out in a few months. I'd like 10 rather than upgrading later (even for free) as I'm guessing I'd have to reload my machine and that is a lot of work. I've got some old fortran programs (yep) that I still use and I have to run it through some virtual window that my IT dude installed. Serious PITA to get that redone.

I see Dell is still selling Enterprise machines with Windows 7 on it. That tells you how good Windows 8 is.

Okay, I have what I need. 2K budget is very good. Give me a few days and I'll come back with a list of suggested laptops. I'll try to give you a few vendors and models to consider. I've been browsing JohnHenry's Eurocom site and although I can't vouch for quality/reliability, they offer laptops with amazing specs and build versatility. A few reviews mention heat as a problem (all i7 laptops are hot!!), but there are many good reviews.

1 TB SSDs definitely exist (including in the M.2 form factor), but are still pretty rare in laptops. In 2-4 months, I expect they will be common, are you willing to wait (since you may be waiting for WIN 10)? If not, lots of shops in the GTA that will do the swap and clone your OS onto the SSD if you are willing. Alternatively, I will try and find dual drive or hybrid drive solutions.

I've read the propaganda about Windows 10 and on-paper it looks pretty good. But I'm from Missouri ..... I'm going to wait and see what feedback is available a few months after release. I agree, clean installs are always preferable to upgrades, although the Windows 7 upgrade was clean and easy.

Don't read too much into the Dell - Win 8 thing. Most enterprise class laptops ship with Win 7 as standard. Win 8 was not really meant to be a business OS.

The hard part: if I was going to drop $2K on a machine that I had to live with for 3+ years, I'd WANT TO PLAY WITH IT before committing. i.e. try the keyboard, feel the weight, make sure the screen doesn't annoy me, does it feel solid, is typing hard on the wrists, does it look crappy, etc. I think you are the same type of person. Not sure how this can happen as most retailers don't carry enterprise class laptops in inventory. <-- something to think about.
 
That's why my 3.5 year old Asus is cashing out:

1. Battery is dying and a new one is $199.00 US.

2. Receptacle to plug the power supply into is not making contact properly. It has to be fiddled with to get it to work. Drives me nuts.

3. mouse is all but dead and you need PRESS down on the left button.

4. Blue screen of death from time to time.

5. SLOW

Anyway, not worth fixing this pig.

I'm not going to try to talk you into keeping this machine, but:

Re #1) These two places sell batteries wholesale. Go with cash and they will sell to the public. Saving of 60%++.
http://batterylots.com/
http://crhtech.com/
Disclaimer: Although they will sell OEM batteries, most of their batteries are Chinese knock-offs. They fit perfectly and have the same or better specs, but they definitely don't last as long (both running on battery and lifespan). I've bought 50+ for friends and family and so-far so-good, but they typically need replacing in ~18 months. Considering the price, I'm okay with that.

Re #2) Both places listed above sell power cords/adapters. I've bought many with no problems, although the brick runs hot. I'm assuming your connectivity problem is in the power cord and not the laptop.

re #4 and 5) Windows sucks. With time the OS becomes cluttered with crap and it slows down significantly. Every 2-3 years you really need to wipe the drive and perform a clean install. Consider it - even if just to use the laptop as a back-up/emergency machine.

re #3) I'll bet you can replace that part for under $150 (guessing). If you are handy with a screwdriver you can do it yourself. Google it, you would be amazed by the self-help material including videos for these types of repairs. It's surprisingly easy. If you want to use it as a back-up machine you can always go with an external mouse.
 
Right now laptop hard drives are a bit better than ones available 3 or 4 years ago because you can get a notebook equipped with newer solid state hybrid drive.
This is usually a say, 1 terabyte drive with 8 gb of flash nand memory built into it.

Also some notebooks with optical drives can be modified using conversion kits.
The kits allow you to take out the optical drive and replace them with a functioning 2nd hard drive.
Lenovo laptops have a product called Ultrabay which allows Lenovo notebook owners to take out their optical drives and replace them with a second SSD hard drive.
That might be a good option.
Good tech geeks in computer stores know which notebooks with optical drives can be modified with conversion kits to add a second high speed SSD.

I've replaced the hard drives on my 3 computers with SSD's in the last year and all 3 computers are much faster than they used to be; so it's understandable that you'd like to get the ssd advantage.

Also, the prices on 1 tb SSD hard drives have come down quite a bit and if you plan on keeping the PC for 3 years might be worth the money.

Samsung and Crucial are both really good SSD manufacturers and below are the Amazon prices.
If prices aren't similar at Canada computers you can show them the Amazon deal and they will price match, or at least in my experience they will price match Amazon.

http://www.amazon.ca/Samsung-Intern...=UTF8&qid=1428117914&sr=8-2&keywords=1+tb+ssd

http://www.amazon.ca/Crucial-BX100-...=UTF8&qid=1428117914&sr=8-1&keywords=1+tb+ssd
 
Go with Canada computers for Samsung SSD($470 for 1 Tb) much cheaper then Amazon link you provided...http://www.canadacomputers.com/product_info.php?cPath=179_1229_1088&item_id=062502


Right now laptop hard drives are a bit better than ones available 3 or 4 years ago because you can get a notebook equipped with newer solid state hybrid drive.
This is usually a say, 1 terabyte drive with 8 gb of flash nand memory built into it.

Also some notebooks with optical drives can be modified using conversion kits.
The kits allow you to take out the optical drive and replace them with a functioning 2nd hard drive.
Lenovo laptops have a product called Ultrabay which allows Lenovo notebook owners to take out their optical drives and replace them with a second SSD hard drive.
That might be a good option.
Good tech geeks in computer stores know which notebooks with optical drives can be modified with conversion kits to add a second high speed SSD.

I've replaced the hard drives on my 3 computers with SSD's in the last year and all 3 computers are much faster than they used to be; so it's understandable that you'd like to get the ssd advantage.

Also, the prices on 1 tb SSD hard drives have come down quite a bit and if you plan on keeping the PC for 3 years might be worth the money.

Samsung and Crucial are both really good SSD manufacturers and below are the Amazon prices.
If prices aren't similar at Canada computers you can show them the Amazon deal and they will price match, or at least in my experience they will price match Amazon.

http://www.amazon.ca/Samsung-Intern...=UTF8&qid=1428117914&sr=8-2&keywords=1+tb+ssd

http://www.amazon.ca/Crucial-BX100-...=UTF8&qid=1428117914&sr=8-1&keywords=1+tb+ssd
 
Let's not lose sight of ALL his requirements.

In his list of requirements he mentioned he was an autoCAD user. As I learned in my research last week, autoCAD has specific hardware requirements in order to take full advantage of all it's features (i.e. 3D modeling and use of certain rendering views). Autodesk publishes a list of certified hardware: http://usa.autodesk.com/adsk/servle..._group=3&release=2016&os=8192&manuf=all&opt=1 <-- this just represents the guaranteed to work list, it's still possible other combinations work, but the message is clear, autoCAD needs a fairly serious video card, CPU and memory.

I priced several of the certified machines and most are in the $1.6K -2K range. Add in a $500 SSD + installation and we're pushing JTK's budget.

JFK, if you are only using the more basic features (i.e. NOT 3D rendering or modeling), please let me know and we (hopefully) can select from a broader range of laptops. What is the make/model of the laptop you have now? I'd like to look at it's specs and that should give me an indication of minimum requirements for the new one. I especially want to know what video card it has.

Since the autoCAD thing is outside my experience/expertise, on Thursday I sent an email to several of my suppliers (Lenovo, HP, Toshiba) asking for certified suggestions based on your requirements. I should get the feedback next week.
 
Last edited:
Only 2 vendors responded to my request: HP and Lenovo.

As mentioned above, Autodesk publishes a list of certified hardware: http://usa.autodesk.com/adsk/servlet...anuf=all&opt=1 <-- this just represents the guaranteed to work list for ALL autoCAD features including 3D rendering. Other hardware combinations could work, especially if your work is limited to 2D work, they just haven't been certified.

HP recommended for 3D autoCAD:
HP ZBook 15 G2 Mobile Workstation: 15.6" 1920x1080 display, i7-4710MQ (4 core) or better CPU, 8GB or more of RAM, NVIDIA Quadro® K610M (or K1100 or K2100), 1TB HDD, Weight 6.2 lbs
This configuration would cost approximately $1850CDN. I suggest you buy the smallest storage and swap in the 1TB Samsung 840 EVO SSD for ~ $2100

HP recommended for a less expensive alternative if you only need support for 2D autoCAD:
HP ZBook 14 G2 Mobile Workstation: 14" 1920x1080 display, Core i7 5500U (2 core), 8GB or more of RAM, Intel HD Graphics 5500, 1TB HDD, Weight 4.0 lbs
This configuration would cost approximately $1700CDN. I suggest you buy the smallest storage and swap in the 1TB Samsung 840 EVO SSD for ~ $1950

More .......
 
Lenovo recommended for 3D autoCAD:
Lenovo ThinkPad W541: 15.6" 1920x1080 display, i7-4710MQ (4 core), 8GB or more of RAM, NVIDIA Quadro K1100 (or K2100), 512GB HDD, Weight 5.6 lbs
This configuration would cost approximately $1600CDN. You have two choices, you could buy the smallest storage and swap in the 1TB Samsung 840 EVO SSD for ~ $1850 or add a M2 version to the W541 in it's expansion slot and run a dual drive system for ~$2100

IBM recommended for a less expensive alternative if you only need support for 2D autoCAD:
Lenovo T450s: 14" 1920x1080 display, i7-5600 (2 core), 8GB or more of RAM, Intel HD Graphics 5500, 512GB HDD, Weight 3.7 lbs
This configuration would cost approximately $1650CDN. You have two choices, swap in the 1TB Samsung 840 EVO SSD for ~ $2150 or add a M2 version to the 450s in it's expansion slot and run a dual drive system for ~$2150

Lenovo Carbon X1: 14" 1920x1080 display, i5-5300 (2 core), 8GB or more of RAM, Intel HD Graphics 5500, 128GB HDD, Weight 2.9 lbs
This configuration would cost approximately $1450CDN. In this case, you must swap in the 1TB Samsung 840 EVO SSD for ~ $1950. The Lenovo rep wasn't able to confirm is local shops could do this for sure

Personally:
- I would consider either the W541 if 3D is mandatory or the T450s if only 2D is required. The W541 is on the heavy side, but if 3D is mandatory, you don't really have an alternative.
- If budget allows get 12 or 16GB RAM. cost is +$150 / $225.
- I think the SSD is worth the extra $$ for all the reasons discussed above.

The prices I have provided are street pricing for Qty 1 from most VARs/Resellers. You might be able to do a bit better if your company has a purchase agreement with a VAR/Reseller.