Configuring TCP/IP on an Ancient Mac

bsi

New member
May 19, 2006
959
0
0
We were getting ready to toss an old unused mac at my work so I took it home to see what is what.

This is a Power Macintosh G3 Power PC, the beige kind, not blue and white. I had to chip through the fossilized dinosaur poop to get at the power switch :) I don't think the machine was powered on since 2004. The surf history pretty much stops in 2002.

So, it powers up just fine but I don't really know what to do with it. Anyway, the TCP/IP was manually configured per the settings at work (per Control Panel, TCP/IP). I want to just set it back to DHCP for my home network but I cannot see where I get to move it off the current setting of "manually configured".

Even if that works, all I want to do is surf the net. I do not need or want to connect it with my other Windows machines on the home network.

Does anyone know how to get at the TCP/IP configuration options? The TCP/IP settings in Control Panel only seem like information without an option to actually change anything. Plus, I set Appletalk to Ethernet (it was on Printer Port when I powered it up). Do I have to be an Administrator or something?

If there is a good on line resource for ancient machines, that would be good too.

Adios
 
bsi said:
So, it powers up just fine but I don't really know what to do with it. Anyway, the TCP/IP was manually configured per the settings at work (per Control Panel, TCP/IP). I want to just set it back to DHCP for my home network but I cannot see where I get to move it off the current setting of "manually configured".

Even if that works, all I want to do is surf the net. I do not need or want to connect it with my other Windows machines on the home network.
If you can't change it from "manually configured" to "DHCP", you can always try to fill in the settings manually. Check your current DNS server from your PC (run-> cmd ... "ipconfig /all"), and give it an IP address higher than you currently use, but on the same subnetwork (e.g. if your PC gets assigned 192.168.1.1, give the Mac something like 192.168.1.200).
 
There was something like Edit, User type.

I picked administrator and then there were choices to unlock and change the settings. I cleared everything and set to DHCP and my router address and voila!

Boy, this puppy has a massive 4.0G HD, initialized in 1997!

I will check out the links for more info.

Thanks