Bicycle experts please weigh in

This thread has made it perfectly clear that no one should ever take bicycle advice from the clown using Comic Sans font.

Yeah, but the red font annoys low lifes and the cackling dead.

BTW- You use the WD-40 to displace the water after your bike gets wet and you wipe it off and put lube on the chain and sprockets. Maybe you can come up with better advice on what to do if you bike gets wet, otherwise get thyself back to the nunnery.

Mother Superior, you jumped the gun.

 
Yeah, but the red font annoys low lifes and the cackling dead.

BTW- You use the WD-40 to displace the water after your bike gets wet and you wipe it off and put lube on the chain and sprockets. Maybe you can come up with better advice on what to do if you bike gets wet, otherwise get thyself back to the nunnery.

Mother Superior, you jumped the gun.


I have 10s of thousands of miles on a bicycle. Probably in the hundreds in the rain. Not once have I wiped my frame down at the end of the day. I have both steel and aluminum framed bicycles and have never had an issue. At the end of a long day I barely have the energy to lube the chain and do any required maintenance let alone wipe down a frame.

Wipe the chain, lube then wipe is all that is needed. Periodically a couple of drops under the cable covers if needed.

Almost all non touring frames today are made of aluminum. The oxidize but do not rust. Oxidized aluminum actually protects the metal..
 
I have only been caught out in the rain twice. ( check the weather report if it looks like rain ) If I get my bike wet, I wipe it down the best I can. WD-40 displaces water ( WD = water displacement ) it is also mildly corrosive. So after spraying a wet chain and gears I wipe that down to remove grease, dirt and water. Then I spray it with lube. Removing moisture and adding lubrication is all you can do.

I also do this when I use my hedge trimmer and small electric chain saw.
 
I have only been caught out in the rain twice. ( check the weather report if it looks like rain ) If I get my bike wet, I wipe it down the best I can. WD-40 displaces water ( WD = water displacement ) it is also mildly corrosive. So after spraying a wet chain and gears I wipe that down to remove grease, dirt and water. Then I spray it with lube. Removing moisture and adding lubrication is all you can do.

I also do this when I use my hedge trimmer and small electric chain saw.

Wow only twice? And you are worried about rust?

I have lost count at the number of times I have ridden in the rain. and I don't commute. Commuters have it far worse not just rain but snow.
 
I absolutely try to avoid being in the rain on a bike. Always check the weather report. Nothing worse than riding all squishy for 5kms. to get home. My only out for doing my 25k. every evening is if it rains. Then I get my reward of Chivas or Glenrothes on the rocks with a splash of sherry.
 
The oxidize but do not rust. Oxidized aluminum actually protects the metal..
It's called anodising. However, if you ride the bike in the winter with salt around, the chloride will attack it and could cause pitting corrosion, especially if there is no paint to protect it, or if there are holidays in the paint coating.
 
Hey guys, when you fix a flat do you do a patch or simply install a new tube?
Why not patch!

This also raises a pet peeve that I have had recently.

I tried to look for a hollow front axle for one of my kid's bikes, to convert it to quick release, so that we could stuff the bike into a trunk from time to time. They don't stock axles any more. I was told to throw away the old wheel and get a new one.

Whatever happened to sustainability with bicycles?
 
I went back to biking after 40 odd years. I ended up getting a folding bike, mid range, with decent accessories. My preferred best would be a Moulton (British) that can be separated for storage or putting into trunk or suitcase for travel. I prefer an IGH over 21-? speeds. Seven speeds should be enough.

For the best place to get information, check out this bike forum: http://www.bikeforums.net/index.php

I learned enough from that site to buy a folding bike from the sixties, all steel from England and taking it completely apart and rebuilding it with new aluminum wheels. Everything came off like bearings, steel balls in forks etc. etc. and regreased and replaced. Had a great time doing it over the winter as a project. The Bike Forum has a wealth of info for all types of riders.

L8
That is one hell of a great site! from old classics to the most modern technology. right now, I am trying to get back into the sport, with my forty-odd year old bikes. And, they ride divinely.

Moulton is still in business, but very expensive.

http://www.moultonbicycles.co.uk/
 
Wow only twice? And you are worried about rust?

I have lost count at the number of times I have ridden in the rain. and I don't commute. Commuters have it far worse not just rain but snow.


I mostly ride downhill mtb so even on a dry day most mountains have wet and muddy spots so after putting 5 hours of DH usually my bike is covered in mud. I usually just hose down my bike at the bike park with a low pressure water especially super careful around joints and fork. After the wash I put my bike in the bike rack and air dry it as I am driving home. After when I get home I clean
and lube my chain, derailer and ect. In the winter I bring my bike to my shop and they take it apart, fully clean, lube , change oil in the fork and do watever needs to be done. Never had any rust issues.
 
Anybody here tried those patches where you just peel off the sticker and put the patch over the hole on your tube? No messing with cement/glue. Do they actually do the job?
 
In my experience, no. They leak after a few weeks. The kits that use rubber glue will last a long time. I know I have patches on my tube from last year. This summer I had no flats and no leaks from the patches.

If you were out on the road they will hold till you get home.
 
In my experience, no. They leak after a few weeks. The kits that use rubber glue will last a long time.
Yeah, I was leery about those stick on patches. However, working with glue is kind of messy and the unused glue inside the tube tries up in a few months.
 
You could always get a tube of contact cement at the dollar store.
 
I have been doing some research on electric bicycles. In Europe 25% of bikes sold are electric. Some with the motor built in to the frame. In US/Canada the prices are 2-3 times more than in Europe for these bikes. I am thinking of converting a bike with a Bafang kit that will cost about $800-1000.

 
My friend bought an electric bike (not an ebike) on sale for about $600 a few years ago. Maybe the batteries are better now but his battery was gradually decreasing in length of life.
 
I think your friend got one of the earlier electric bikes. They had heavy nickel cadmium batteries and wear out much faster. The kit in the video uses a motor mounted under the crank and not a hub motor. The center of gravity is lower and the bike handles better.