2015 Dodge Charger

The Charger is an ugly car designed to please two types of car buyers and missing the mark on both.
Who wants a a four door muscle sedan?

Sorry your wrong, It was a two door.
 
I love the originals, and looks wise, I agree no comparing. But with 40yrs of advances, I like the idea of todays muscle car ( Camaro, Mustang, and Challenger ).
You have no smell of gas from a carb, or exhaust like the old ones have. You have so much more horsepower, comfort, braking, and dependability.

You can now drive to a drag park with the A/C on, race all day, run great times, then drive that same car to Florida while getting very respectable millage lol

Florida WOW my state, I had great times there. Daytona Beach where you could drive your car on the beach.
 
I'm sure it also happened a lot back in 1970 and 1971...lol

No doubt, but those old muscle cars probably had 300 to 400 hp. With these Hellcats having 700 hp, it's going to be a death sentence for some.

A new Challenger Hellcat pulled up beside me the other day. Although I prefer the Charger, it looked nice and sounded even better!

1970 Challenger topped out at 425 hp with the stock 426 Hemi! And 490 pds of torque.

http://musclecars.howstuffworks.com/classic-muscle-cars/1970-dodge-challenger-r-t-440-six-pack.htm
 
I spent a short stint working at a car rental agency a few years ago and I hated driving the Chargers.

You had to floor it to get the fucking things to go above 60!
 
1970 Challenger topped out at 425 hp with the stock 426 Hemi! And 490 pds of torque.

http://musclecars.howstuffworks.com/classic-muscle-cars/1970-dodge-challenger-r-t-440-six-pack.htm

Back-then horsepower was measured as SAE gross - at the crank, headers, no mufflers, timing optimized with no accessories installed and was corrected for temperature. To compare it to today's SAE net horsepower numbers (stock ignition timing, carburetion, exhaust, accessories) reduce gross horsepower by ~10-20%, but there's no set formula. Note, even net horsepower is still measured at the crankshaft, not at the rear wheels. The Germans typically measure DIN horsepower.

Musclecar engines were often under-rated from 1965 to 1972. Most Hemis had a gross rating closer to 460-480 (I've seen claims as high as 500, but no proof in a reputable magazine for a stock motor), but with big tube headers, good exhaust, good gas, optimized timing; 485-500 could be had. Change of cam and 500+ was possible. Cam and compression could get 600-650 in a (barely) streetable car.

There were actually 3 street 426 Hemis and 1 (maybe 2?) race engines, with the 68-69 Road Runner being the most powerful street motor. There were >>5 other hemi displacements.

I was a crank-head back then and my buddy had a hemi cuda (non-numbers matching). Fast as hell, but he did lose many street races, usually to 427 Camaros, Novas and the odd vette. His greatest fear was having the car stolen, if it wasn't in his garage, he always had it in sight. All muscle car owners tended to be protective of their cars, but hemi owners were compulsive protective.


http://driving.ca/bmw/m5/auto-news/news/five-of-the-most-underrated-engines-and-their-true-power
 
I spent a short stint working at a car rental agency a few years ago and I hated driving the Chargers.

You had to floor it to get the fucking things to go above 60!

Those were probably the V-6 at rental agencies.
 
I love the originals, and looks wise, I agree no comparing. But with 40yrs of advances, I like the idea of todays muscle car ( Camaro, Mustang, and Challenger ).
You have no smell of gas from a carb, or exhaust like the old ones have. You have so much more horsepower, comfort, braking, and dependability.

You can now drive to a drag park with the A/C on, race all day, run great times, then drive that same car to Florida while getting very respectable millage lol

All of that is 100% true, BUT:

IT IS THE smell of the gas, the transmissions that felt linked to your gut, the throaty roar, the bass feel in your chest, the lope of a overlapping cam, the uncluttered and simple under-hood space, that gave those old cars their soul. You felt connected to the drivetrain and the road. Anyone interested could learn to work on the car in no-time and with some reading and talking to others could be swapping heads and cams with a minimal of exotic tools. Back then the hobby meant hanging with like minded people, attending parking lot shows, occasional street races or trips to the track.

I'll bet that not more that 5 guys here on TERB (excluding mechanics and pro racers) would have hands-on experience power tuning a modern Camaro, Mustang, and Challenger let-alone performing THEIR OWN bolt-on modifications. Modern muscle cars are are extremely expensive with power mods being high priced. Modern performance enthusiasts talk chips, pulleys, superchargers and exhaust bypasses. You need a variety of specialized tools, cabling and programs. It can be a bitch trying to figure out what you did wrong without a chassis dyno and appropriate instrumentation. I go to the parking lot car shows all the time as well as the SEMA show once, modern gear-heads thrive, but they tend not to be weekenders, are older, have allot of money and are certainly brighter that most crank-heads of the 70s. They love their cars, but they also love their fat-ass comfort.
 
I was a crank-head back then and my buddy had a hemi cuda (non-numbers matching). Fast as hell, but he did lose many street races, usually to 427 Camaros, Novas and the odd vette. His greatest fear was having the car stolen, if it wasn't in his garage, he always had it in sight. All muscle car owners tended to be protective of their cars, but hemi owners were compulsive protective.


]

I have an older toy car myself. Restored it from the frame up. I'm still a little paranoid about it being stolen. (It would be so simple to hot wire.)

As a result, I often remove the ignition rotor when I'm parking it on the street for any reason. Good luck getting it going then. 2 clips on the dizzy and pull that rotor and it aint going anywhere.
 
All of that is 100% true, BUT:

IT IS THE smell of the gas, the transmissions that felt linked to your gut, the throaty roar, the bass feel in your chest, the lope of a overlapping cam, the uncluttered and simple under-hood space, that gave those old cars their soul. You felt connected to the drivetrain and the road. Anyone interested could learn to work on the car in no-time and with some reading and talking to others could be swapping heads and cams with a minimal of exotic tools. Back then the hobby meant hanging with like minded people, attending parking lot shows, occasional street races or trips to the track.

I'll bet that not more that 5 guys here on TERB (excluding mechanics and pro racers) would have hands-on experience power tuning a modern Camaro, Mustang, and Challenger let-alone performing THEIR OWN bolt-on modifications. Modern muscle cars are are extremely expensive with power mods being high priced. Modern performance enthusiasts talk chips, pulleys, superchargers and exhaust bypasses. You need a variety of specialized tools, cabling and programs. It can be a bitch trying to figure out what you did wrong without a chassis dyno and appropriate instrumentation. I go to the parking lot car shows all the time as well as the SEMA show once, modern gear-heads thrive, but they tend not to be weekenders, are older, have allot of money and are certainly brighter that most crank-heads of the 70s. They love their cars, but they also love their fat-ass comfort.

Agreed.

My toy car is very simple to work on. I have a manual, and a full set of tools and there is nothing I can't do on that car. I could pull the engine out blind folded.

My day to day driver is a different story. Just changing the spark plugs is a nightmare.

I wish they wouldn't put all the plastic on the top of the motor, hiding it from view. In my opinion, I WANT to see the heads, the intakes, everything. Part of the reason for all the plastic lids is that there are so man damn wires everywhere, it's unsightly. The old cars might have had 3 or 4 wires visible on top of the engine. Remove the lid on a modern engine and there are probably 100 wires running every which way but loose.
 
Share some sites

Following are some links to GTA muscle car sales and restore shops. Please share if you have others.

http://site.legendarymotorcar.com/ <-- huge inventory, bit expensive. These guys have a TV show and were formally on 2 other TV shows
http://www.oldbrockmusclecars.com/mu...inventory.aspx <-- good inventory. By appointment only, do not just show up.
http://stingrayauto.com/ <-- they don't sell vettes, but are well know locally for their modifications - i.e. putting modern suspensions, brakes and engines in older vettes.
 
Agreed.

My toy car is very simple to work on. I have a manual, and a full set of tools and there is nothing I can't do on that car. I could pull the engine out blind folded.

..........

I wish they wouldn't put all the plastic on the top of the motor, hiding it from view. In my opinion, I WANT to see the heads, the intakes, everything. Part of the reason for all the plastic lids is that there are so man damn wires everywhere, it's unsightly. The old cars might have had 3 or 4 wires visible on top of the engine. Remove the lid on a modern engine and there are probably 100 wires running every which way but loose.

Unless you feel it's personally identifying, what is your toy car?

Agree with the plastic cap and ugly motor comments. Ever looked under the hood of a modern M3, especially a turbo-6? Ugly!